Hi Stephen, On 09/18/14 20:21, Stephen Warren wrote: > After commit 52658fda7abc ("compulab: eeprom: add support for defining eeprom > i2c bus"), the trimslice board fails to build with: > > .../board/compulab/common/eeprom.c: In function ‘cl_eeprom_read’: > .../board/compulab/common/eeprom.c:37:24: error: ‘CONFIG_SYS_I2C_EEPROM_BUS’ > undeclared (first use in this function) > .../board/compulab/common/eeprom.c:37:24: note: each undeclared identifier is > reported only once for each function it appears in > > I have no idea if this EEPROM code should even run on TrimSlice or not. Can > you take a look at the correct fix?
We have already submitted a temporary fix, see [1]. The intend is to switch to Kconfig for all CompuLab boards and that will bring the proper fix for the problem. After this, the temporary fixes can be removed. [1] https://patchwork.ozlabs.org/patch/390381/ -- Regards, Igor. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot