Tom Rix wrote: > This is against the arm/next branch > > Zoom2 has two meaningful board revisions : production and beta. This change > will allow the board differences to be handled at runtime. > > The Zoom2 change is based on how the Beagle Board does its board revision > but since it is newer, it uses the OMAP3 GPIO API that was recently added. > > This was run tested on Zoom2 beta and production boards. > > Since I was taking a close look at the Beagle code, I updated it to also > use the OMAP3 GPIO API. > > This was run tested on a Beagle B7 board. A version C board was not > available for testing. It would be good if someone verified the Beagle change > with a versioin C board.
Recent u-boot-arm next + the 5 patches (3 x board revision detection + 2 x GPIO bank clocks) boot tested on Beagle rev C: -- cut -- U-Boot 2009.06-rc2-01028-gef3c752-dirty (May 31 2009 - 18:13:48) OMAP3530-GP ES3.0, CPU-OPP2 L3-165MHz OMAP3 Beagle board + LPDDR/NAND DRAM: 256 MB NAND: 256 MiB In: serial Out: serial Err: serial Board revision C Die ID #783000030000000004013f7806019018 OMAP3 beagleboard.org # -- cut -- Looks fine. So all 5 patches: Acked-by: Dirk Behme <dirk.be...@googlemail.com> Thanks Dirk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot