Implement a feature to allow fastboot to write the downloaded image to the space reserved for the Protective MBR and the Primary GUID Partition Table.
Signed-off-by: Steve Rae <s...@broadcom.com> --- This series depends on: http://patchwork.ozlabs.org/patch/383184/ (to 388186) README | 7 +++++++ common/fb_mmc.c | 19 ++++++++++++++++--- 2 files changed, 23 insertions(+), 3 deletions(-) diff --git a/README b/README index e8341b7..2e4e0c4 100644 --- a/README +++ b/README @@ -1639,6 +1639,13 @@ The following options need to be configured: regarding the non-volatile storage device. Define this to the eMMC device that fastboot should use to store the image. + CONFIG_FASTBOOT_GPT_NAME + The fastboot "flash" command supports writing the downloaded + image to the Protective MBR and the Primary GUID Partition + Table. This occurs when the specified "partition name" on the + "fastboot flash" command line matches this value. + Default is GPT_ENTRY_NAME (currently "gpt") if undefined. + - Journaling Flash filesystem support: CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, CONFIG_JFFS2_NAND_DEV diff --git a/common/fb_mmc.c b/common/fb_mmc.c index fb06d8a..89fbf23 100644 --- a/common/fb_mmc.c +++ b/common/fb_mmc.c @@ -4,12 +4,17 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#include <config.h> #include <common.h> #include <fb_mmc.h> #include <part.h> #include <aboot.h> #include <sparse_format.h> +#ifndef CONFIG_FASTBOOT_GPT_NAME +#define CONFIG_FASTBOOT_GPT_NAME GPT_ENTRY_NAME +#endif + /* The 64 defined bytes plus the '\0' */ #define RESPONSE_LEN (64 + 1) @@ -62,9 +67,9 @@ static void write_raw_image(block_dev_desc_t *dev_desc, disk_partition_t *info, void fb_mmc_flash_write(const char *cmd, void *download_buffer, unsigned int download_bytes, char *response) { - int ret; block_dev_desc_t *dev_desc; disk_partition_t info; + lbaint_t blksz; /* initialize the response buffer */ response_str = response; @@ -76,8 +81,16 @@ void fb_mmc_flash_write(const char *cmd, void *download_buffer, return; } - ret = get_partition_info_efi_by_name(dev_desc, cmd, &info); - if (ret) { + if (strcmp(cmd, CONFIG_FASTBOOT_GPT_NAME) == 0) { + printf("%s: updating GUID Partition Table (including MBR)\n", + __func__); + /* start at Protective MBR */ + info.start = (GPT_PRIMARY_PARTITION_TABLE_LBA - 1); + blksz = dev_desc->blksz; + info.blksz = blksz; + /* assume that the Partition Entry Array starts in LBA 2 */ + info.size = (2 + (GPT_ENTRY_NUMBERS * GPT_ENTRY_SIZE) / blksz); + } else if (get_partition_info_efi_by_name(dev_desc, cmd, &info)) { error("cannot find partition: '%s'\n", cmd); fastboot_fail("cannot find partition"); return; -- 1.8.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
