Enable the CONFIG_CMD_FS_GENERIC on m28evk to avoid per-fs specific commands
and tweak the environment to cater for this new option.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Stefano Babic <sba...@denx.de>
---
include/configs/m28evk.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 2d9ad5f..322b45f 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -32,6 +32,7 @@
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
#define CONFIG_CMD_GPIO
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_I2C
@@ -236,7 +237,7 @@
"addargs=run addcons addmtd addmisc\0" \
"mmcload=" \
"mmc rescan ; " \
- "ext4load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \
+ "load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \
"ubiload=" \
"ubi part UBI ; ubifsmount ubi0:rootfs ; " \
"ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \
@@ -280,7 +281,7 @@
"try_bootscript=" \
"mmc rescan;" \
"if test -e mmc 0:2 ${bootscript} ; then " \
- "if ext4load mmc 0:2 ${kernel_addr_r} ${bootscript};" \
+ "if load mmc 0:2 ${kernel_addr_r} ${bootscript};" \
"then;" \
"\techo Running bootscript...;" \
"\tsource ${kernel_addr_r};" \
--
2.1.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
