SCFG_SCFGREVCR is SCFG bit reverse register. This register
must be written with 0xFFFFFFFF before writing to any other
SCFG register. Then other SCFG register could be written in
big-endian mode.
Address: 157_0000h base + 200h offset = 157_0200h
Bit 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15|16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31
W/R SCFGREV
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0
0-31
SCFGREV SCFG Bit Reverse Control Filed
32'h 0000_0000 - No bit reverse is applied
32'h FFFF_FFFF - Bit reverse is applied; so 31:0 will be stored/read as 0:31
This patch removes the bit reversing for SCFG registers in
u-boot. It will be implemented through PBI commands in RCW
.pbi
write 0x570200, 0xffffffff
.end
So other SCFG register could be written in big-endian mode
in u-boot or kernel directly.
Signed-off-by: Alison Wang <alison.w...@freescale.com>
---
board/freescale/ls1021aqds/ls1021aqds.c | 2 --
board/freescale/ls1021atwr/ls1021atwr.c | 5 -----
2 files changed, 7 deletions(-)
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c
b/board/freescale/ls1021aqds/ls1021aqds.c
index e32dbeb..56028f8 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -136,9 +136,7 @@ int board_early_init_f(void)
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
#ifdef CONFIG_TSEC_ENET
- out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_REV);
out_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR);
- out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_NOREV);
#endif
#ifdef CONFIG_FSL_IFC
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c
b/board/freescale/ls1021atwr/ls1021atwr.c
index 811c911..ff7130e 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -250,11 +250,8 @@ int board_early_init_f(void)
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
#ifdef CONFIG_TSEC_ENET
- out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_REV);
out_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR);
out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125);
- udelay(10);
- out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_NOREV);
#endif
#ifdef CONFIG_FSL_IFC
@@ -262,9 +259,7 @@ int board_early_init_f(void)
#endif
#ifdef CONFIG_FSL_DCU_FB
- out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_REV);
out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN);
- out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_NOREV);
#endif
return 0;
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
