Hi Stefano > On 22/09/2014 13:57, Christian Gmeiner wrote: > > This patch adds support for the OT1200 series of devices. > > > > Following components are used in u-boot: > > + ethernet > > + i2c > > + emmc > > + gpio > > > > For more details see README. > > > > Changes v1 > v2 > > Can you also version your patches in the subject ? (aka: "[PATCH vX] > imx6:..."). Rather patchwork makes some mess and it is not able to > follow the versions, numbering helps - thanks !
Upps. > > There are some warnings reported by checkpatch, a couple opf them are > due to line over 80 chars. > > Please fix warnings and repost, thanks ! Will do - thanks. > > > - make use of enable_cspi_clock(..) > > - fix usage of OUTPUT_40OHM define > > - added README > > > > Signed-off-by: Christian Gmeiner <christian.gmei...@gmail.com> > > --- > > arch/arm/Kconfig | 4 + > > board/bachmann/ot1200/Kconfig | 23 ++++ > > board/bachmann/ot1200/MAINTAINERS | 6 + > > board/bachmann/ot1200/Makefile | 9 ++ > > board/bachmann/ot1200/README | 20 +++ > > board/bachmann/ot1200/ot1200.c | 251 > > ++++++++++++++++++++++++++++++++++++++ > > configs/ot1200_defconfig | 3 + > > include/configs/ot1200.h | 196 +++++++++++++++++++++++++++++ > > 8 files changed, 512 insertions(+) > > create mode 100644 board/bachmann/ot1200/Kconfig > > create mode 100644 board/bachmann/ot1200/MAINTAINERS > > create mode 100644 board/bachmann/ot1200/Makefile > > create mode 100644 board/bachmann/ot1200/README > > create mode 100644 board/bachmann/ot1200/ot1200.c > > create mode 100644 configs/ot1200_defconfig > > create mode 100644 include/configs/ot1200.h > > > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > > index 106aed9..8face21 100644 > > --- a/arch/arm/Kconfig > > +++ b/arch/arm/Kconfig > > @@ -414,6 +414,9 @@ config TARGET_HUMMINGBOARD > > config TARGET_TQMA6 > > bool "TQ Systems TQMa6 board" > > > > +config TARGET_OT1200 > > + bool "Bachmann OT1200" > > + > > config OMAP34XX > > bool "OMAP34XX SoC" > > > > @@ -577,6 +580,7 @@ source "board/atmel/at91sam9rlek/Kconfig" > > source "board/atmel/at91sam9x5ek/Kconfig" > > source "board/atmel/sama5d3_xplained/Kconfig" > > source "board/atmel/sama5d3xek/Kconfig" > > +source "board/bachmann/ot1200/Kconfig" > > source "board/balloon3/Kconfig" > > source "board/barco/titanium/Kconfig" > > source "board/bluegiga/apx4devkit/Kconfig" > > diff --git a/board/bachmann/ot1200/Kconfig b/board/bachmann/ot1200/Kconfig > > new file mode 100644 > > index 0000000..55a825d > > --- /dev/null > > +++ b/board/bachmann/ot1200/Kconfig > > @@ -0,0 +1,23 @@ > > +if TARGET_OT1200 > > + > > +config SYS_CPU > > + string > > + default "armv7" > > + > > +config SYS_BOARD > > + string > > + default "ot1200" > > + > > +config SYS_VENDOR > > + string > > + default "bachmann" > > + > > +config SYS_SOC > > + string > > + default "mx6" > > + > > +config SYS_CONFIG_NAME > > + string > > + default "ot1200" > > + > > +endif > > diff --git a/board/bachmann/ot1200/MAINTAINERS > > b/board/bachmann/ot1200/MAINTAINERS > > new file mode 100644 > > index 0000000..ad75c24 > > --- /dev/null > > +++ b/board/bachmann/ot1200/MAINTAINERS > > @@ -0,0 +1,6 @@ > > +BACHMANN ELECTRONIC OT1200 BOARD > > +M: Christian Gmeiner <christian.gmei...@gmail.com> > > +S: Maintained > > +F: board/bachmann/ot1200 > > +F: include/configs/ot1200.h > > +F: configs/ot1200*_defconfig > > diff --git a/board/bachmann/ot1200/Makefile b/board/bachmann/ot1200/Makefile > > new file mode 100644 > > index 0000000..1bd42e8 > > --- /dev/null > > +++ b/board/bachmann/ot1200/Makefile > > @@ -0,0 +1,9 @@ > > +# > > +# Copyright (C) 2012-2013, Guennadi Liakhovetski <l...@denx.de> > > +# (C) Copyright 2012-2013 Freescale Semiconductor, Inc. > > +# Copyright (C) 2013, Boundary Devices <i...@boundarydevices.com> > > +# > > +# SPDX-License-Identifier: GPL-2.0+ > > +# > > + > > +obj-y := ot1200.o > > diff --git a/board/bachmann/ot1200/README b/board/bachmann/ot1200/README > > new file mode 100644 > > index 0000000..efcff11 > > --- /dev/null > > +++ b/board/bachmann/ot1200/README > > @@ -0,0 +1,20 @@ > > +U-Boot for the Bachmann electronic GmbH OT1200 devices > > + > > +There are two different versions of the base print, > > Do you mean here base board ? We have two different PCBs .. I think I will go with this working or even "printed circuit boards". It looks like board will fit the best :) greets -- Christian Gmeiner, MSc https://soundcloud.com/christian-gmeiner _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot