> In my side: > MTD0 (720kB): U-boot > MTD1 (80kB) : env. Variables > MTD2 (12MB) : kernel + initramfs > MTD3 (50MB) : rootfs
Maybe it will not help you but I have MTD0 (all the nand 256M) MTD1 uboot+ embedded config 2M RAW MTD2 1M JFFS2 MTD5 config 5M JFFS2 MTD3 Kernel + initramfs 12M JFFS2 MTD4 KernelBKp 12M JFFS2 MTD5 content 224M Scanning and fsload of the MTD3 partition take 3 seconds with 2009.03 With 1.3.4 it was something like 6-10 seconds. But never 1 minute. I have seen that when scanning the content partition of 224M. > If it exists a difference between 2009.03 and 1.3.3 it is not sufficient. It > is very slow in both versions. It takes more than 1 minutes to obtain the > result of "fsinfo" command !!! sYLVAIN _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot This electronic message may contain proprietary and confidential information of Verint Systems Inc., its affiliates and/or subsidiaries. The information is intended to be for the use of the individual(s) or entity(ies) named above. If you are not the intended recipient (or authorized to receive this e-mail for the intended recipient), you may not use, copy, disclose or distribute to anyone this message or any information contained in this message. If you have received this electronic message in error, please notify us by replying to this e-mail. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
