Hi Georges,
On Sat, 27 Sep 2014 21:48:10 +0200, Georges Savoundararadj
<savou...@gmail.com> wrote:
> This commit relocates the exception vectors.
> As ARM1176 and ARMv7 have the security extensions, it uses VBAR. For
> the other ARM processors, it copies the relocated exception vectors to
> the correct address: 0x00000000 or 0xFFFF0000.
>
> Signed-off-by: Georges Savoundararadj <savou...@gmail.com>
> Cc: Albert Aribaud <albert.u.b...@aribaud.net>
> Cc: Tom Warren <twar...@nvidia.com>
>
> ---
> This patch needs some tests because it impacts many boards. I have
> tested it with my raspberry pi in the two cases: using VBAR and
> using the copied exception vectors.
>
> Changes in v2:
> - Relocate exception vectors also on processors which do not support
> security extensions
> - Reword the commit message
>
> arch/arm/cpu/armv7/start.S | 6 ------
> arch/arm/lib/relocate.S | 30 ++++++++++++++++++++++++++++++
> 2 files changed, 30 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
> index fedd7c8..fdc05b9 100644
> --- a/arch/arm/cpu/armv7/start.S
> +++ b/arch/arm/cpu/armv7/start.S
> @@ -81,12 +81,6 @@ ENTRY(c_runtime_cpu_setup)
> mcr p15, 0, r0, c7, c10, 4 @ DSB
> mcr p15, 0, r0, c7, c5, 4 @ ISB
> #endif
> -/*
> - * Move vector table
> - */
> - /* Set vector address in CP15 VBAR register */
> - ldr r0, =_start
> - mcr p15, 0, r0, c12, c0, 0 @Set VBAR
>
> bx lr
>
> diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib/relocate.S
> index 8035251..88a478e 100644
> --- a/arch/arm/lib/relocate.S
> +++ b/arch/arm/lib/relocate.S
> @@ -6,6 +6,8 @@
> * SPDX-License-Identifier: GPL-2.0+
> */
>
> +#include <asm-offsets.h>
> +#include <config.h>
> #include <linux/linkage.h>
>
> /*
> @@ -52,6 +54,34 @@ fixnext:
> cmp r2, r3
> blo fixloop
>
> + /*
> + * Relocate the exception vectors
> + */
> +#if (defined(CONFIG_ARM1176) || defined(CONFIG_ARMV7))
I would prefer a single CONFIG_HAS_VBAR symbol defined through
Kconfig.
> + /*
> + * If the ARM processor has the security extensions,
> + * use VBAR to relocate the exception vectors.
> + */
> + ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
> + mcr p15, 0, r0, c12, c0, 0 /* Set VBAR */
> +#else
> + /*
> + * Copy the relocated exception vectors to the
> + * correct address
> + * CP15 c1 V bit gives us the location of the vectors:
> + * 0x00000000 or 0xFFFF0000.
> + */
> + ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
> + mrc p15, 0, r2, c1, c0, 0 /* V bit (bit[13]) in CP15 c1 */
> + ands r2, r2, #(1 << 13)
> + ldreq r1, =0x00000000 /* If V=0 */
> + ldrne r1, =0xFFFF0000 /* If V=1 */
> + ldmia r0!, {r2-r8,r10}
> + stmia r1!, {r2-r8,r10}
> + ldmia r0!, {r2-r8,r10}
> + stmia r1!, {r2-r8,r10}
> +#endif
> +
> relocate_done:
>
> #ifdef __XSCALE__
Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
