Hi, On 10/11/2014 05:40 PM, Ian Campbell wrote: > On Mon, 2014-10-06 at 19:57 +0200, Hans de Goede wrote: >> Note we also drop the SPL check for initializing the 2nd mmc slot, the SPL >> check is not necessary with Kconfig, because only options explicitly marked >> as also being for the SPL get set during SPL builds. >> >> Signed-off-by: Hans de Goede <hdego...@redhat.com> >> --- >> board/sunxi/Kconfig | 8 ++++++++ >> board/sunxi/board.c | 2 +- >> 2 files changed, 9 insertions(+), 1 deletion(-) >> >> diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig >> index 497b093..cb4a881 100644 >> --- a/board/sunxi/Kconfig >> +++ b/board/sunxi/Kconfig >> @@ -32,6 +32,14 @@ config USB_KEYBOARD >> Say Y here to add support for using a USB keyboard (typically used >> in combination with a graphical console on HDMI). >> >> +config MMC_SUNXI_SLOT_EXTRA >> + int "mmc extra slot number" >> + default -1 >> + ---help--- >> + sunxi builds always enable mmc0, some boards also have a sdcard slot >> + or emmc on mmc2 or mmc3. Setting this to 2 or 3 will enable support >> + for this. > > What happened to mmc1?
When writing this I was under the assumption that nothing was actually using mmc1, I will fix the help text. > > Regardless: > > Acked-by: Ian Campbell <i...@hellion.org.uk> Regards, Hans _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot