This change breaks various hardcoded assumptions in the linux-sunxi-3.4
kernels, causing a divide by 0 error in the linux-sunxi-3.4 nand driver,
rendering 3.4 kernels unbootable. Besides this problem, it also breaks LCD
output (on devices without nand).
Fixes for these issues are being added to the linux-sunxi-3.4 kernel, but for
now it seems better to revert this.
This reverts commit 013f2d746955147439215a4939655c9ed6bdd866.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
arch/arm/cpu/armv7/sunxi/dram.c | 28 +++++++++++++++++-----------
1 file changed, 17 insertions(+), 11 deletions(-)
diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c
index 584f742..8c4dd51 100644
--- a/arch/arm/cpu/armv7/sunxi/dram.c
+++ b/arch/arm/cpu/armv7/sunxi/dram.c
@@ -256,7 +256,7 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk)
/* PLL5P and PLL6 are the potential clock sources for MBUS */
u32 pll6x_div, pll5p_div;
u32 pll6x_clk = clock_get_pll6() / 1000000;
- u32 pll5p_clk = clk / 24 * 48;
+ u32 pll5p_clk = clk / 24 * 24;
u32 pll5p_rate, pll6x_rate;
#ifdef CONFIG_SUN7I
pll6x_clk *= 2; /* sun7i uses PLL6*2, sun5i uses just PLL6 */
@@ -269,40 +269,46 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk)
reg_val &= ~CCM_PLL5_CTRL_N_MASK; /* set N to 0 (x0) */
reg_val &= ~CCM_PLL5_CTRL_P_MASK; /* set P to 0 (x1) */
if (clk >= 540 && clk < 552) {
- /* dram = 540MHz, pll5p = 1080MHz */
- pll5p_clk = 1080;
+ /* dram = 540MHz, pll5p = 540MHz */
+ pll5p_clk = 540;
reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15));
+ reg_val |= CCM_PLL5_CTRL_P(1);
} else if (clk >= 512 && clk < 528) {
- /* dram = 512MHz, pll5p = 1536MHz */
- pll5p_clk = 1536;
+ /* dram = 512MHz, pll5p = 384MHz */
+ pll5p_clk = 384;
reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4));
reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16));
+ reg_val |= CCM_PLL5_CTRL_P(2);
} else if (clk >= 496 && clk < 504) {
- /* dram = 496MHz, pll5p = 1488MHz */
- pll5p_clk = 1488;
+ /* dram = 496MHz, pll5p = 372MHz */
+ pll5p_clk = 372;
reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31));
+ reg_val |= CCM_PLL5_CTRL_P(2);
} else if (clk >= 468 && clk < 480) {
- /* dram = 468MHz, pll5p = 936MHz */
- pll5p_clk = 936;
+ /* dram = 468MHz, pll5p = 468MHz */
+ pll5p_clk = 468;
reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13));
+ reg_val |= CCM_PLL5_CTRL_P(1);
} else if (clk >= 396 && clk < 408) {
- /* dram = 396MHz, pll5p = 792MHz */
- pll5p_clk = 792;
+ /* dram = 396MHz, pll5p = 396MHz */
+ pll5p_clk = 396;
reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11));
+ reg_val |= CCM_PLL5_CTRL_P(1);
} else {
/* any other frequency that is a multiple of 24 */
reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(clk / 24));
+ reg_val |= CCM_PLL5_CTRL_P(CCM_PLL5_CTRL_P_X(2));
}
reg_val &= ~CCM_PLL5_CTRL_VCO_GAIN; /* PLL VCO Gain off */
reg_val |= CCM_PLL5_CTRL_EN; /* PLL On */
--
2.1.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
