Unify the code for doing read/write into single function, since the
code for both the read and write is almost identical. This again
trims down the code duplication.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Simon Glass <s...@chromium.org>
Cc: Tom Rini <tr...@ti.com>
Cc: Heiko Schocher <h...@denx.de>
---
common/cmd_eeprom.c | 51 +++++++++++++++++++++------------------------------
1 file changed, 21 insertions(+), 30 deletions(-)
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 231f424..6a02496 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -150,38 +150,44 @@ static int eeprom_rw_block(unsigned offset, uchar *addr,
unsigned alen,
return ret;
}
-int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned
cnt)
+static int eeprom_rw(unsigned dev_addr, unsigned offset, uchar *buffer,
+ unsigned cnt, bool read)
{
unsigned end = offset + cnt;
+ unsigned alen, len;
int rcode = 0;
uchar addr[3];
- /*
- * Read data until done or would cross a page boundary.
- * We must write the address again when changing pages
- * because the next page may be in a different device.
- */
while (offset < end) {
- unsigned alen, len;
-
alen = eeprom_addr(dev_addr, offset, addr);
len = eeprom_len(offset, end);
- rcode = eeprom_rw_block(offset, addr, alen, buffer, len, 1);
+ rcode = eeprom_rw_block(offset, addr, alen, buffer, len, read);
buffer += len;
offset += len;
+
+ if (!read)
+ udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
}
return rcode;
}
-int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned
cnt)
+int eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned
cnt)
{
- unsigned end = offset + cnt;
- int rcode = 0;
- uchar addr[3];
+ /*
+ * Read data until done or would cross a page boundary.
+ * We must write the address again when changing pages
+ * because the next page may be in a different device.
+ */
+ return eeprom_rw(dev_addr, offset, buffer, cnt, 1);
+}
+
+int eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned
cnt)
+{
+ int ret;
eeprom_write_enable(dev_addr, 1);
@@ -190,25 +196,10 @@ int eeprom_write (unsigned dev_addr, unsigned offset,
uchar *buffer, unsigned cn
* We must write the address again when changing pages
* because the address counter only increments within a page.
*/
-
- while (offset < end) {
- unsigned alen, len;
-
- alen = eeprom_addr(dev_addr, offset, addr);
-
- len = eeprom_len(offset, end);
-
- rcode = eeprom_rw_block(offset, addr, alen, buffer, len, 0);
-
- buffer += len;
- offset += len;
-
- udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
- }
+ ret = eeprom_rw(dev_addr, offset, buffer, cnt, 1);
eeprom_write_enable(dev_addr, 0);
-
- return rcode;
+ return ret;
}
static int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
--
2.1.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
