On Wed, Oct 22, 2014 at 05:47:56PM +0300, Khoronzhuk, Ivan wrote: > The EDMA3 controller’s primary purpose is to service data transfers > that you program between two memory-mapped slave endpoints on the device. > > Typical usage includes, but is not limited to the following: > - Servicing software-driven paging transfers (e.g., transfers from external > memory, such as SDRAM to internal device memory, such as DSP L2 SRAM) > - Servicing event-driven peripherals, such as a serial port > - Performing sorting or sub-frame extraction of various data structures > - Offloading data transfers from the main device DSP(s) > - See the device-specific data manual for specific peripherals that are > accessible via the EDMA3 controller > > Signed-off-by: Ivan Khoronzhuk <ivan.khoronz...@ti.com>
Applied to u-boot-ti/master, thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
