For MX6SL, uses the OSC 24Mhz as the preclk source in CCM. Align the
preclk setting with kernel.
Signed-off-by: Ye.Li <b37...@freescale.com>
---
arch/arm/cpu/armv7/mx6/soc.c | 17 +++++++++++++++++
1 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 6dc2600..c0bb431 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -239,6 +239,18 @@ static void clear_mmdc_ch_mask(void)
writel(0, &mxc_ccm->ccdr);
}
+#ifdef CONFIG_MX6SL
+static void set_preclk_from_osc(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ u32 reg;
+
+ reg = readl(&mxc_ccm->cscmr1);
+ reg |= MXC_CCM_CSCMR1_PER_CLK_SEL_MASK;
+ writel(reg, &mxc_ccm->cscmr1);
+}
+#endif
+
int arch_cpu_init(void)
{
init_aips();
@@ -254,6 +266,11 @@ int arch_cpu_init(void)
if (mxc_get_clock(MXC_ARM_CLK) == 396000000)
set_ahb_rate(132000000);
+ /* Set perclk to source from OSC 24MHz */
+#if defined(CONFIG_MX6SL)
+ set_preclk_from_osc();
+#endif
+
imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */
#ifdef CONFIG_APBH_DMA
--
1.7.4.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
