Hello Alison, On Fri, 17 Oct 2014 16:00:30 +0800, Alison Wang <b18...@freescale.com> wrote: > To support interactive DDR debugger, cli_simple.o, cli.o, cli_readline.o, > command.o, s_record.o, xyzModem.o and cmd_disk.o are all needed for > drivers/ddr/fsl/interactive.c. > > In current common/Makefile, the above .o files are only produced when > CONFIG_SPL_BUILD is disabled. > > For LS102xA, interactive DDR debugger is needed in SD/NAND boot too, and > I enabled CONFIG_FSL_DDR_INTERACTIVE. But according to the current > common/Makfile, all the above .o files are not produced in SPL part > because CONFIG_SPL_BUILD is enabled in SPL part, the following error > will be shown, > > drivers/ddr/fsl/built-in.o: In function `fsl_ddr_interactive': > /home/wangh/layerscape/u-boot/drivers/ddr/fsl/interactive.c:1871: > undefined reference to `cli_readline_into_buffer' > /home/wangh/layerscape/u-boot/drivers/ddr/fsl/interactive.c:1873: > undefined reference to `cli_simple_parse_line' > make[1]: *** [spl/u-boot-spl] Error 1 > make: *** [spl/u-boot-spl] Error 2 > > So this patch fixed this issue and the above .o files will be produced > no matter CONFIG_SPL_BUILD is enabled or disabled. > > Signed-off-by: Alison Wang <alison.w...@freescale.com> > --- > Change log: > v3: Gave more explaination in the commit. > v2: No change.
This does not apply cleanly. Could you rebase and resubmit? Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
