________________________________ From: John Rigby [mailto:jcri...@gmail.com] Sent: Sunday, June 07, 2009 7:43 AM To: Pillai, Manikandan Cc: Josh Karabin; u-boot@lists.denx.de Subject: Re: [U-Boot] Ethernet not working on OMAP3 board with
Does anyone know what the current status of this is? I see the patched discussed in April was in net-next for a while then was removed with the understanding that it would go into master since it was a bug fix but I don't see it in master. Also Mani says that the patch does not fix master anyway but does fix arm-next. Did I get that right? [Pillai, Manikandan] Yes that's correct. I can't get it working on master. Thanks John On Thu, May 28, 2009 at 3:43 AM, Pillai, Manikandan <mani.pil...@ti.com<mailto:mani.pil...@ti.com>> wrote: > -----Original Message----- > From: Pillai, Manikandan > Sent: Wednesday, May 27, 2009 10:01 AM > To: 'Josh Karabin' > Cc: Dirk Behme; u-boot@lists.denx.de<mailto:u-boot@lists.denx.de> > Subject: RE: [U-Boot] Ethernet not working on OMAP3 board with > > > OK I will try with the same commit and send the results. > > > -----Original Message----- > > From: Josh Karabin > > [mailto:gkara...@vocollect.com<mailto:gkara...@vocollect.com>] > > Sent: Tuesday, May 26, 2009 8:26 PM > > To: Pillai, Manikandan > > Cc: Dirk Behme; u-boot@lists.denx.de<mailto:u-boot@lists.denx.de> > > Subject: Re: [U-Boot] Ethernet not working on OMAP3 board with > > > > > > Pillai, Manikandan wrote: > > > Hi Dirk, > > > > > > I have already tried this patch it does not work on EVM. > > > Was any other patch applied along with this ? > > > > That was the only one that I needed, on top of the arm/next branch from > > last week. The last commit was 86d5c98d3d97d631b1d3a5f5e6a17e87c99b42cf > > : "OMAP3: Fix CKE1 MUX setting to allow self-refresh". > > [Pillai, Manikandan] I tried with this commit and it works. If I use the v2009.06-rc1 tag with these changes it does not work. smc911x: initializing smc911x: detected LAN9115 controller smc911x: phy initialized Addrr = 0 1 2 2 4 4 smc911x: MAC 00:01:02:02:04:04 BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 So guess there are some more changes that require to be done. Any ideas welcome. > > - Josh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de<mailto:U-Boot@lists.denx.de> http://lists.denx.de/mailman/listinfo/u-boot
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot