155fa9af95a "spi: mxc: fix sf probe when using mxc_spi" break
spi flash detection on the aristainetos board. Fix this.
Signed-off-by: Heiko Schocher <h...@denx.de>
---
Changes in v2:
- fix bus number
board/aristainetos/aristainetos.c | 6 ++++++
include/configs/aristainetos.h | 2 +-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/board/aristainetos/aristainetos.c
b/board/aristainetos/aristainetos.c
index 3bfcf5b..06922c0 100644
--- a/board/aristainetos/aristainetos.c
+++ b/board/aristainetos/aristainetos.c
@@ -230,6 +230,12 @@ static iomux_v3_cfg_t const backlight_pads[] = {
MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+ return (bus == CONFIG_SF_DEFAULT_BUS && cs == CONFIG_SF_DEFAULT_CS)
+ ? (IMX_GPIO_NR(3, 20)) : -1;
+}
+
static void setup_spi(void)
{
int i;
diff --git a/include/configs/aristainetos.h b/include/configs/aristainetos.h
index 20aea85..e6a08df 100644
--- a/include/configs/aristainetos.h
+++ b/include/configs/aristainetos.h
@@ -77,7 +77,7 @@
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS 3
-#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 20)<<8))
+#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 20000000
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
--
1.8.3.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
