This patch adds support for Odroid-XU3.
Signed-off-by: Hyungwon Hwang <human.hw...@samsung.com>
---
arch/arm/cpu/armv7/exynos/Kconfig | 4 ++
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/exynos5422-odroidxu3.dts | 72 +++++++++++++++++++
board/samsung/odroid-xu3/Kconfig | 12 ++++
board/samsung/odroid-xu3/MAINTAINERS | 6 ++
board/samsung/odroid-xu3/Makefile | 7 ++
board/samsung/odroid-xu3/odroid-xu3.c | 132 ++++++++++++++++++++++++++++++++++
board/samsung/odroid-xu3/setup.h | 115 +++++++++++++++++++++++++++++
configs/odroid-xu3_defconfig | 4 ++
include/configs/odroid_xu3.h | 73 +++++++++++++++++++
10 files changed, 427 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/exynos5422-odroidxu3.dts
create mode 100644 board/samsung/odroid-xu3/Kconfig
create mode 100644 board/samsung/odroid-xu3/MAINTAINERS
create mode 100644 board/samsung/odroid-xu3/Makefile
create mode 100644 board/samsung/odroid-xu3/odroid-xu3.c
create mode 100644 board/samsung/odroid-xu3/setup.h
create mode 100644 configs/odroid-xu3_defconfig
create mode 100644 include/configs/odroid_xu3.h
diff --git a/arch/arm/cpu/armv7/exynos/Kconfig
b/arch/arm/cpu/armv7/exynos/Kconfig
index 3a25fee..a47cb34 100644
--- a/arch/arm/cpu/armv7/exynos/Kconfig
+++ b/arch/arm/cpu/armv7/exynos/Kconfig
@@ -22,6 +22,9 @@ config TARGET_TRATS2
config TARGET_ODROID
bool "Exynos4412 Odroid board"
+config TARGET_ODROID_XU3
+ bool "Exynos5422 Odroid board"
+
config TARGET_ARNDALE
bool "Exynos5250 Arndale board"
select OF_CONTROL if !SPL_BUILD
@@ -60,6 +63,7 @@ source "board/samsung/universal_c210/Kconfig"
source "board/samsung/origen/Kconfig"
source "board/samsung/trats2/Kconfig"
source "board/samsung/odroid/Kconfig"
+source "board/samsung/odroid-xu3/Kconfig"
source "board/samsung/arndale/Kconfig"
source "board/samsung/smdk5250/Kconfig"
source "board/samsung/smdk5420/Kconfig"
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 2dcfcc0..66191f9 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -12,7 +12,8 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5420-smdk5420.dtb \
exynos5420-peach-pit.dtb \
- exynos5800-peach-pi.dtb
+ exynos5800-peach-pi.dtb \
+ exynos5422-odroidxu3.dtb
dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
diff --git a/arch/arm/dts/exynos5422-odroidxu3.dts
b/arch/arm/dts/exynos5422-odroidxu3.dts
new file mode 100644
index 0000000..34f52c6
--- /dev/null
+++ b/arch/arm/dts/exynos5422-odroidxu3.dts
@@ -0,0 +1,72 @@
+/*
+ * Odroid XU3 device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "exynos54xx.dtsi"
+
+/ {
+ model = "Odroid XU3 based on EXYNOS5422";
+ compatible = "samsung,odroidxu3", "samsung,exynos5";
+
+ config {
+ hwid = "smdk5420 TEST A-A 9382";
+ };
+
+ aliases {
+ serial0 = "/serial@12C00000";
+ console = "/serial@12C20000";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x10000000
+ 0x50000000 0x10000000
+ 0x60000000 0x10000000
+ 0x70000000 0x10000000
+ 0x80000000 0x10000000
+ 0x90000000 0x10000000
+ 0xa0000000 0x10000000
+ 0xb0000000 0xea00000>;
+ };
+
+ serial@12C20000 {
+ status="okay";
+ };
+
+ /* s2mps11 is on i2c bus 4 */
+ i2c@12ca0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic@66 {
+ reg = <0x66>;
+ compatible = "samsung,s2mps11-pmic";
+ };
+ };
+
+ mmc@12200000 {
+ samsung,bus-width = <8>;
+ samsung,timing = <1 3 3>;
+ samsung,removable = <0>;
+ samsung,pre-init;
+ };
+
+ mmc@12210000 {
+ status = "disabled";
+ };
+
+ mmc@12220000 {
+ samsung,bus-width = <4>;
+ samsung,timing = <1 2 3>;
+ samsung,removable = <1>;
+ };
+
+ mmc@12230000 {
+ status = "disabled";
+ };
+};
diff --git a/board/samsung/odroid-xu3/Kconfig b/board/samsung/odroid-xu3/Kconfig
new file mode 100644
index 0000000..6159692
--- /dev/null
+++ b/board/samsung/odroid-xu3/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_ODROID_XU3
+
+config SYS_BOARD
+ default "odroid-xu3"
+
+config SYS_VENDOR
+ default "samsung"
+
+config SYS_CONFIG_NAME
+ default "odroid_xu3"
+
+endif
diff --git a/board/samsung/odroid-xu3/MAINTAINERS
b/board/samsung/odroid-xu3/MAINTAINERS
new file mode 100644
index 0000000..50cf928
--- /dev/null
+++ b/board/samsung/odroid-xu3/MAINTAINERS
@@ -0,0 +1,6 @@
+ODROID-XU3 BOARD
+M: Hyungwon Hwang <human.hw...@samsung.com>
+S: Maintained
+F: board/samsung/odroid-xu3/
+F: include/configs/odroid_xu3.h
+F: configs/odroid-xu3_defconfig
diff --git a/board/samsung/odroid-xu3/Makefile
b/board/samsung/odroid-xu3/Makefile
new file mode 100644
index 0000000..85ae5c5
--- /dev/null
+++ b/board/samsung/odroid-xu3/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (c) 2014 Samsung Electronics Co., Ltd. All rights reserved.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := odroid-xu3.o
diff --git a/board/samsung/odroid-xu3/odroid-xu3.c
b/board/samsung/odroid-xu3/odroid-xu3.c
new file mode 100644
index 0000000..f1d8667
--- /dev/null
+++ b/board/samsung/odroid-xu3/odroid-xu3.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics
+ * Hyungwon Hwang <human.hw...@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <netdev.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/power.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/sromc.h>
+#include "../setup.h"
+#include "setup.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned int get_board_rev(void)
+{
+ unsigned int rev = 0;
+ return rev;
+}
+
+int exynos_init(void)
+{
+ return 0;
+}
+
+static int board_clock_init(void)
+{
+ unsigned int set, clr, clr_src_cpu, clr_pll_con0;
+ struct exynos5420_clock *clk = (struct exynos5420_clock *)
+ samsung_get_base_clock();
+ /*
+ * CMU_CPU clocks src to MPLL
+ * Bit values: 0 ; 1
+ * MUX_APLL_SEL: FIN_PLL ; FOUT_APLL
+ * MUX_CORE_SEL: MOUT_APLL ; SCLK_MPLL
+ * MUX_HPM_SEL: MOUT_APLL ; SCLK_MPLL_USER_C
+ * MUX_MPLL_USER_SEL_C: FIN_PLL ; SCLK_MPLL
+ */
+
+ /* Set CMU_CPU clocks src to OSCCLK */
+ clr_src_cpu = MUX_APLL_SEL(1) | MUX_CORE_SEL(1);
+ set = MUX_APLL_SEL(0) | MUX_CORE_SEL(1);
+
+ clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set);
+
+ while (MUX_STAT_CPU_CHANGING(readl(&clk->mux_stat_cpu)))
+ continue;
+
+ /* Set APLL to 1200MHz */
+ clr_pll_con0 = SDIV(7) | PDIV(63) | MDIV(1023) | FSEL(1) |
+ PLL_ENABLE(1);
+ set = SDIV(0) | PDIV(2) | MDIV(100) | PLL_ENABLE(1);
+
+ clrsetbits_le32(&clk->apll_con0, clr_pll_con0, set);
+
+ while (!(readl(&clk->apll_con0) & PLL_LOCKED_BIT))
+ continue;
+
+ /* Set CMU_CPU clocks src to APLL */
+ set = MUX_APLL_SEL(1) | MUX_CORE_SEL(0);
+ clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set);
+
+ while (MUX_STAT_CPU_CHANGING(readl(&clk->mux_stat_cpu)))
+ continue;
+
+ clr = ARM_RATIO(7) | CPUD_RATIO(7) | ATB_RATIO(7) |
+ PCLK_DBG_RATIO(7) | APLL_RATIO(7) | ARM2_RATIO(7);
+ set = ARM_RATIO(0) | CPUD_RATIO(2) | ATB_RATIO(5) |
+ PCLK_DBG_RATIO(5) | APLL_RATIO(0) | ARM2_RATIO(0);
+
+ clrsetbits_le32(&clk->div_cpu0, clr, set);
+
+ while (readl(&clk->div_stat_cpu0) & DIV_STAT_CPU0_CHANGING)
+ continue;
+
+ /* Set MPLL to 800MHz */
+ set = SDIV(1) | PDIV(3) | MDIV(200) | PLL_ENABLE(1);
+
+ clrsetbits_le32(&clk->mpll_con0, clr_pll_con0, set);
+
+ while (!(readl(&clk->mpll_con0) & PLL_LOCKED_BIT))
+ continue;
+
+ /* Set CLKMUX_UART src to MPLL */
+ clr = UART0_SEL(7) | UART1_SEL(7) | UART2_SEL(7) | UART3_SEL(7);
+ set = UART0_SEL(3) | UART1_SEL(3) | UART2_SEL(3) | UART3_SEL(3);
+
+ clrsetbits_le32(&clk->src_peric0, clr, set);
+
+ /* Set SCLK_UART to 400 MHz (MPLL / 2) */
+ clr = UART0_RATIO(15) | UART1_RATIO(15) | UART2_RATIO(15) |
+ UART3_RATIO(15);
+ set = UART0_RATIO(1) | UART1_RATIO(1) | UART2_RATIO(1) |
+ UART3_RATIO(1);
+
+ clrsetbits_le32(&clk->div_peric0, clr, set);
+
+ while (readl(&clk->div_stat_peric0) & DIV_STAT_PERIC0_CHANGING)
+ continue;
+
+ /* Set CLKMUX_MMC src to MPLL */
+ clr = MUX_MMC0_SEL(7) | MUX_MMC1_SEL(7) | MUX_MMC2_SEL(7);
+ set = MUX_MMC0_SEL(3) | MUX_MMC1_SEL(3) | MUX_MMC2_SEL(3);
+
+ clrsetbits_le32(&clk->src_fsys, clr, set);
+
+ clr = MMC0_RATIO(0x3ff) | MMC1_RATIO(0x3ff) | MMC2_RATIO(0x3ff);
+ set = MMC0_RATIO(0) | MMC1_RATIO(0) | MMC2_RATIO(0);
+
+ clrsetbits_le32(&clk->div_fsys1, clr, set);
+
+ /* Wait for divider ready status */
+ while (readl(&clk->div_stat_fsys1) & DIV_STAT_FSYS1_CHANGING)
+ continue;
+
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int exynos_early_init_f(void)
+{
+ return board_clock_init();
+}
+#endif
diff --git a/board/samsung/odroid-xu3/setup.h b/board/samsung/odroid-xu3/setup.h
new file mode 100644
index 0000000..afec01f
--- /dev/null
+++ b/board/samsung/odroid-xu3/setup.h
@@ -0,0 +1,115 @@
+/*
+ * (C) Copyright 2014 Samsung Electronics
+ * Hyungwon Hwang <human.hw...@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ODROID_XU3_SETUP__
+#define __ODROID_XU3_SETUP__
+
+/* CLK_SRC_CPU */
+#define MUX_APLL_SEL(x) ((x) & 0x1)
+#define MUX_CORE_SEL(x) (((x) & 0x1) << 16)
+
+/* CLK_MUX_STAT_CPU */
+#define APLL_SEL(x) ((x) & 0x7)
+#define CORE_SEL(x) (((x) & 0x7) << 16)
+#define MUX_STAT_CPU_CHANGING(x) !(((x) & APLL_SEL(0)) || \
+ (x) & APLL_SEL(1) || \
+ (x) & CORE_SEL(0) || \
+ (x) & CORE_SEL(1))
+
+/* CLK_DIV_CPU0 */
+#define ARM_RATIO(x) ((x) & 0x7)
+#define CPUD_RATIO(x) (((x) & 0x7) << 4)
+#define ATB_RATIO(x) (((x) & 0x7) << 16)
+#define PCLK_DBG_RATIO(x) (((x) & 0x7) << 20)
+#define APLL_RATIO(x) (((x) & 0x7) << 24)
+#define ARM2_RATIO(x) (((x) & 0x7) << 28)
+
+/* CLK_DIV_STAT_CPU0 */
+#define DIV_CPUD(x) (((x) & 0x1) << 4)
+#define DIV_ATB(x) (((x) & 0x1) << 16)
+#define DIV_PCLK_DBG(x) (((x) & 0x1) << 20)
+#define DIV_APLL(x) (((x) & 0x1) << 24)
+#define DIV_ARM2(x) (((x) & 0x1) << 28)
+
+#define DIV_STAT_CHANGING 0x1
+#define DIV_STAT_CPU0_CHANGING (DIV_CPUD(DIV_STAT_CHANGING) | \
+ DIV_ATB(DIV_STAT_CHANGING) | \
+ DIV_PCLK_DBG(DIV_STAT_CHANGING) | \
+ DIV_APLL(DIV_STAT_CHANGING) | \
+ DIV_ARM2(DIV_STAT_CHANGING))
+
+/* Set CLK_SRC_PERIC0 */
+#define UART0_SEL(x) (((x) & 0xf) << 4)
+#define UART1_SEL(x) (((x) & 0xf) << 8)
+#define UART2_SEL(x) (((x) & 0xf) << 12)
+#define UART3_SEL(x) (((x) & 0xf) << 16)
+
+/* Set CLK_DIV_PERIL0 */
+#define UART0_RATIO(x) (((x) & 0xf) << 8)
+#define UART1_RATIO(x) (((x) & 0xf) << 12)
+#define UART2_RATIO(x) (((x) & 0xf) << 16)
+#define UART3_RATIO(x) (((x) & 0xf) << 20)
+
+/* Set CLK_DIV_STAT_PERIL0 */
+#define DIV_UART0(x) ((x) & 0x1)
+#define DIV_UART1(x) (((x) & 0x1) << 4)
+#define DIV_UART2(x) (((x) & 0x1) << 8)
+#define DIV_UART3(x) (((x) & 0x1) << 12)
+#define DIV_UART4(x) (((x) & 0x1) << 16)
+
+#define DIV_STAT_PERIC0_CHANGING (DIV_UART4(DIV_STAT_CHANGING) | \
+ DIV_UART3(DIV_STAT_CHANGING) | \
+ DIV_UART2(DIV_STAT_CHANGING) | \
+ DIV_UART1(DIV_STAT_CHANGING) | \
+ DIV_UART0(DIV_STAT_CHANGING))
+
+/* CLK_SRC_FSYS */
+#define MUX_MMC0_SEL(x) (((x) & 0x7) << 8)
+#define MUX_MMC1_SEL(x) (((x) & 0x7) << 12)
+#define MUX_MMC2_SEL(x) (((x) & 0x7) << 16)
+
+/* CLK_DIV_FSYS1 */
+#define MMC0_RATIO(x) ((x) & 0x3ff)
+#define MMC1_RATIO(x) (((x) & 0x3ff) << 10)
+#define MMC2_RATIO(x) (((x) & 0x3ff) << 20)
+
+#define DIV_MMC0(x) (((x) & 1) << 20)
+#define DIV_MMC1(x) (((x) & 1) << 24)
+#define DIV_MMC2(x) (((x) & 1) << 28)
+
+#define DIV_STAT_FSYS1_CHANGING (DIV_MMC0(DIV_STAT_CHANGING) | \
+ DIV_MMC1(DIV_STAT_CHANGING) | \
+ DIV_MMC2(DIV_STAT_CHANGING))
+
+#define MPLL_FOUT_SEL_SHIFT 4
+#define EXYNOS5_EPLLCON0_LOCKED_SHIFT 29 /* EPLL Locked bit position*/
+#define TIMEOUT_EPLL_LOCK 1000
+
+#define AUDIO_0_RATIO_MASK 0x0f
+#define AUDIO_1_RATIO_MASK 0x0f
+
+#define AUDIO0_SEL_MASK 0xf
+#define AUDIO1_SEL_MASK 0xf
+
+#define CLK_SRC_SCLK_EPLL 0x7
+#define CLK_SRC_MOUT_EPLL (1<<12)
+#define AUDIO_CLKMUX_ASS (1<<0)
+
+/* CON0 bit-fields */
+#define EPLL_CON0_MDIV_MASK 0x1ff
+#define EPLL_CON0_PDIV_MASK 0x3f
+#define EPLL_CON0_SDIV_MASK 0x7
+#define EPLL_CON0_MDIV_SHIFT 16
+#define EPLL_CON0_PDIV_SHIFT 8
+#define EPLL_CON0_SDIV_SHIFT 0
+#define EPLL_CON0_LOCK_DET_EN_SHIFT 28
+#define EPLL_CON0_LOCK_DET_EN_MASK 1
+
+#define MPLL_FOUT_SEL_MASK 0x1
+#define BPLL_FOUT_SEL_SHIFT 0
+#define BPLL_FOUT_SEL_MASK 0x1
+#endif
diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig
new file mode 100644
index 0000000..74aa0cf
--- /dev/null
+++ b/configs/odroid-xu3_defconfig
@@ -0,0 +1,4 @@
+CONFIG_ARM=y
+CONFIG_ARCH_EXYNOS=y
+CONFIG_TARGET_ODROID_XU3=y
+CONFIG_DEFAULT_DEVICE_TREE="exynos5422-odroidxu3"
diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h
new file mode 100644
index 0000000..867ac74
--- /dev/null
+++ b/include/configs/odroid_xu3.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ * Hyungwon Hwang <human.hw...@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ODROID_XU3_H
+#define __CONFIG_ODROID_XU3_H
+
+#include "exynos5-common.h"
+
+#define CONFIG_SYS_PROMPT "ODROID-XU3 # "
+#define CONFIG_IDENT_STRING " for ODROID-XU3"
+
+#define CONFIG_OF_CONTROL
+#define CONFIG_BOARD_COMMON
+
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CONFIG_SYS_TEXT_BASE 0x43E00000
+
+/* select serial console configuration */
+#define CONFIG_SERIAL2 /* use SERIAL 2 */
+
+#define TZPC_BASE_OFFSET 0x10000
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+/*
+ * FIXME: The number of bank is actually 8. But there is no way to reserver the
+ * last 16 Mib in the last bank now. So I just excluded the last bank
+ * temporally.
+ */
+#define CONFIG_NR_DRAM_BANKS 7
+#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
+
+#define CONFIG_ENV_IS_IN_MMC
+
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
+/* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */
+#undef CONFIG_EXYNOS_TMU
+#undef CONFIG_TMU_CMD_DTT
+
+#undef CONFIG_EXYNOS_SPL
+#undef CONFIG_SILENT_CONSOLE
+#undef CONFIG_CROS_EC
+#undef CONFIG_CROS_EC_SPI
+#undef CONFIG_CROS_EC_I2C
+#undef CONFIG_CROS_EC_KEYB
+#undef CONFIG_CMD_CROS_EC
+#undef CONFIG_KEYBOARD
+#undef CONFIG_SPI_BOOTING
+#undef CONFIG_ENV_IS_IN_SPI_FLASH
+#undef CONFIG_SPI_FLASH
+#undef CONFIG_EXYNOS_SPI
+#undef CONFIG_CMD_SF
+#undef CONFIG_CMD_SPI
+#undef CONFIG_SPI_FLASH_WINBOND
+#undef CONFIG_SPI_FLASH_GIGADEVICE
+#undef CONFIG_OF_SPI
+#undef CONFIG_FIT_BEST_MATCH
+#undef CONFIG_USB_BOOTING
+#undef CONFIG_CMD_NET
+#undef CONFIG_SMC911X
+#undef CONFIG_CMD_PXE
+#undef CONFIG_MENU
+#undef CONFIG_ENV_IS_IN_SPI_FLASH
+
+
+#endif /* __CONFIG_H */
--
1.8.3.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
