On Mon, Nov 03, 2014 at 11:32:24AM +0200, Igor Grinberg wrote: > CompuLab cm-t3517 is Computer on Module (CoM) based on AM3517 SoC. > Features: up to 256MB DDR2, up to 512MB NAND, USB hub, mUSB, WiFi, BT, > Analog audio codec, touch screen controller, LED. > > Add basic support including: > LED, Serial console, NAND, MMC, GPIO, I2C, 256MB DRAM. > > Signed-off-by: Igor Grinberg <grinb...@compulab.co.il> [snip] > +/* > + * The early kernel mapping on ARM currently only maps from the base of DRAM > + * to the end of the kernel image. The kernel is loaded at DRAM base + > 0x8000. > + * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000, > + * so that leaves DRAM base to DRAM base + 0x4000 available. > + */ > +#define CONFIG_SYS_BOOTMAPSZ 0x4000
The big comment about layout at the top of
include/configs/ti_armv7_common.h applies to omap3 too, are you sure you
want to go in the direction instead? In fact, are you sure you can't /
don't want to leverage that file?
> +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
> + 115200}
Use the default table?
> +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */
> + /* works on */
> +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
> + 0x01F00000) /* 31MB */
Really want this on? See doc/README.memory-test
--
Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
