On 08/11/2014 22:27, John Tobias wrote: > iMX6 SabreSD has different stack address compare > to the default stack address defined on the file. > > The CONFIG_SYS_TEXT_BASE is defined in mx6sabre_common.h which is > same address defined on file. At the same time to avoid compilation > warnings. > --- > include/configs/imx6_spl.h | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h > index 5a5f940..4ff37b3 100644 > --- a/include/configs/imx6_spl.h > +++ b/include/configs/imx6_spl.h > @@ -29,7 +29,9 @@ > #define CONFIG_SPL_TEXT_BASE 0x00908000 > #define CONFIG_SPL_MAX_SIZE 0x10000 > #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7" > +#ifndef CONFIG_SPL_STACK > #define CONFIG_SPL_STACK 0x0091FFB8 > +#endif
Why is this required ? > #define CONFIG_SPL_LIBCOMMON_SUPPORT > #define CONFIG_SPL_LIBGENERIC_SUPPORT > #define CONFIG_SPL_SERIAL_SUPPORT > @@ -66,7 +68,9 @@ > #define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ > #define CONFIG_SYS_SPL_MALLOC_START 0x18300000 > #define CONFIG_SYS_SPL_MALLOC_SIZE 0x3200000 /* 50 MB */ > +#ifndef CONFIG_SYS_TEXT_BASE > #define CONFIG_SYS_TEXT_BASE 0x17800000 > #endif > +#endif > Why is this required ? Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot