Le lundi 10 novembre 2014 à 13:46 -0500, Tom Rini a écrit : > On Sat, Nov 08, 2014 at 10:29:24PM +0100, Paul Kocialkowski wrote: > > Le samedi 08 novembre 2014 à 20:55 +0100, Paul Kocialkowski a écrit : > > > Boards using the TWL4030 regulator may not all use the LDOs the same way > > > (e.g. MMC2 power can be controlled by another LDO than VMMC2). > > > This delegates TWL4030 MMC power initializations to board-specific > > > functions, > > > that may still call twl4030_power_mmc_init for the default behavior. > > > > > > Signed-off-by: Paul Kocialkowski <cont...@paulk.fr> > > > --- > > > board/comelit/dig297/dig297.c | 5 +++++ > > > board/compulab/cm_t35/cm_t35.c | 7 +++++++ > > > board/corscience/tricorder/tricorder.c | 7 +++++++ > > > board/isee/igep00x0/igep00x0.c | 7 +++++++ > > > board/logicpd/omap3som/omap3logic.c | 7 +++++++ > > > board/logicpd/zoom1/zoom1.c | 5 +++++ > > > board/matrix_vision/mvblx/mvblx.c | 6 ++++++ > > > board/nokia/rx51/rx51.c | 6 ++++++ > > > board/overo/overo.c | 7 +++++++ > > > board/pandora/pandora.c | 5 +++++ > > > board/technexion/tao3530/tao3530.c | 7 +++++++ > > > board/ti/beagle/beagle.c | 7 +++++++ > > > board/ti/evm/evm.c | 7 +++++++ > > > board/ti/sdp3430/sdp.c | 5 +++++ > > > board/timll/devkit8000/devkit8000.c | 7 +++++++ > > > drivers/mmc/omap_hsmmc.c | 7 +------ > > > 16 files changed, 96 insertions(+), 6 deletions(-) > > > > > > diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c > > > index 2b826df..9d4c41b 100644 > > > --- a/board/comelit/dig297/dig297.c > > > +++ b/board/comelit/dig297/dig297.c > > > @@ -133,6 +133,11 @@ int board_mmc_init(bd_t *bis) > > > { > > > return omap_mmc_init(0, 0, 0, -1, -1); > > > } > > > + > > > +void board_mmc_power_init(void) > > > +{ > > > > I just figured, in the context of the SPL, board_mmc_init will be called > > from omap3/board.c instead of the board file, so perhaps it would be > > worth adding, in board_mmc_power_init: #ifdef CONFIG_SPL_BUILD and then > > checking spl_boot_device to only enable the relevant LDO. > > If we get to this point we can do the same thing we do for > board_mmc_init which is have one in say > arch/arm/cpu/armv7/omap-common/boot-common.c that checks > spl_boot_device()
That wouldn't work for my use case, on the Optimus Black, where regulators are used in a non-standard way. The whole point of this to me is to not have platform-common code to handle MMC regulators, because the way those are wired to MMC devices is not the same for each platform, but is instead board-specific. Is there any objection to making a v5 that takes the SPL context in account on each of those boards? Thanks -- Paul Kocialkowski, Replicant developer Replicant is a fully free Android distribution Website: http://www.replicant.us/ Blog: http://blog.replicant.us/ Wiki/tracker/forums: http://redmine.replicant.us/
signature.asc
Description: This is a digitally signed message part
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot