Add some basic tests to check that the system works as expected.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v2:
- Add a test for automatic binding of generic I2C devices
- Add a new asm/test.h header for tests in sandbox
arch/sandbox/include/asm/test.h | 15 ++++++
drivers/i2c/sandbox_i2c.c | 8 +++
test/dm/Makefile | 1 +
test/dm/i2c.c | 112 ++++++++++++++++++++++++++++++++++++++++
test/dm/test.dts | 17 ++++++
5 files changed, 153 insertions(+)
create mode 100644 arch/sandbox/include/asm/test.h
create mode 100644 test/dm/i2c.c
diff --git a/arch/sandbox/include/asm/test.h b/arch/sandbox/include/asm/test.h
new file mode 100644
index 0000000..d7f7bb5
--- /dev/null
+++ b/arch/sandbox/include/asm/test.h
@@ -0,0 +1,15 @@
+/*
+ * Test-related constants for sandbox
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_TEST_H
+#define __ASM_TEST_H
+
+/* The sandbox driver always permits an I2C device with this address */
+#define SANDBOX_I2C_TEST_ADDR 0x59
+
+#endif
diff --git a/drivers/i2c/sandbox_i2c.c b/drivers/i2c/sandbox_i2c.c
index 3beb0f9..6d7f114 100644
--- a/drivers/i2c/sandbox_i2c.c
+++ b/drivers/i2c/sandbox_i2c.c
@@ -11,6 +11,7 @@
#include <errno.h>
#include <fdtdec.h>
#include <i2c.h>
+#include <asm/test.h>
#include <dm/lists.h>
#include <dm/device-internal.h>
@@ -67,6 +68,10 @@ static int sandbox_i2c_probe_chip(struct udevice *bus, uint
chip_addr)
struct udevice *emul;
int ret;
+ /* Special test code to return success but with no emulation */
+ if (chip_addr == SANDBOX_I2C_TEST_ADDR)
+ return 0;
+
ret = get_emul(bus, chip_addr, &emul, &ops);
if (ret)
return ret;
@@ -129,6 +134,9 @@ static int sandbox_i2c_child_pre_probe(struct udevice *dev)
{
struct dm_i2c_chip *i2c_chip = dev_get_parentdata(dev);
+ /* Ignore our test address */
+ if (i2c_chip->chip_addr == SANDBOX_I2C_TEST_ADDR)
+ return 0;
return i2c_chip_ofdata_to_platdata(gd->fdt_blob, dev->of_offset,
i2c_chip);
}
diff --git a/test/dm/Makefile b/test/dm/Makefile
index 75d3d41..612aa95 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -20,4 +20,5 @@ ifneq ($(CONFIG_SANDBOX),)
obj-$(CONFIG_DM_GPIO) += gpio.o
obj-$(CONFIG_DM_SPI) += spi.o
obj-$(CONFIG_DM_SPI_FLASH) += sf.o
+obj-$(CONFIG_DM_I2C) += i2c.o
endif
diff --git a/test/dm/i2c.c b/test/dm/i2c.c
new file mode 100644
index 0000000..3d5d066
--- /dev/null
+++ b/test/dm/i2c.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2013 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <dm/device-internal.h>
+#include <dm/test.h>
+#include <dm/uclass-internal.h>
+#include <dm/ut.h>
+#include <dm/util.h>
+#include <asm/state.h>
+#include <asm/test.h>
+
+static const int busnum;
+static const int chip = 0x2c;
+
+/* Test that we can find buses and chips */
+static int dm_test_i2c_find(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+ const int no_chip = 0x10;
+
+ ut_asserteq(-ENODEV, uclass_find_device_by_seq(UCLASS_I2C, busnum,
+ false, &bus));
+
+ /*
+ * i2c_post_bind() will bind devices to chip selects. Check this then
+ * remove the emulation and the slave device.
+ */
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_probe(bus, chip, &dev));
+ ut_asserteq(-ENODEV, i2c_probe(bus, no_chip, &dev));
+ ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_I2C, 1, &bus));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_find, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+static int dm_test_i2c_read_write(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+ uint8_t buf[5];
+
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_get_chip(bus, chip, &dev));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf)));
+ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\0AB\0", sizeof(buf)));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_read_write, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+static int dm_test_i2c_speed(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+ uint8_t buf[5];
+
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_get_chip(bus, chip, &dev));
+ ut_assertok(i2c_set_bus_speed(bus, 100000));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(i2c_set_bus_speed(bus, 400000));
+ ut_asserteq(400000, i2c_get_bus_speed(bus));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_asserteq(-EINVAL, i2c_write(dev, 0, buf, 5));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_speed, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+static int dm_test_i2c_addr_len(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+ uint8_t buf[5];
+
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_get_chip(bus, chip, &dev));
+ ut_assertok(i2c_set_addr_len(dev, 1));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+
+ /* The sandbox driver allows this setting, but then fails reads */
+ ut_assertok(i2c_set_addr_len(dev, 2));
+ ut_asserteq(-EINVAL, i2c_read(dev, 0, buf, 5));
+
+ /* This is not supported by the uclass */
+ ut_asserteq(-EINVAL, i2c_set_addr_len(dev, 4));
+
+ /* This is faulted by the sandbox driver */
+ ut_asserteq(-EINVAL, i2c_set_addr_len(dev, 3));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_addr_len, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+static int dm_test_i2c_probe_empty(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_probe(bus, SANDBOX_I2C_TEST_ADDR, &dev));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_probe_empty, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
diff --git a/test/dm/test.dts b/test/dm/test.dts
index 1fba792..69991a3 100644
--- a/test/dm/test.dts
+++ b/test/dm/test.dts
@@ -93,6 +93,23 @@
num-gpios = <10>;
};
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ compatible = "sandbox,i2c";
+ clock-frequency = <100000>;
+ eeprom@2c {
+ reg = <0x2c>;
+ compatible = "i2c-eeprom";
+ emul {
+ compatible = "sandbox,i2c-eeprom";
+ sandbox,filename = "i2c.bin";
+ sandbox,size = <128>;
+ };
+ };
+ };
+
spi@0 {
#address-cells = <1>;
#size-cells = <0>;
--
2.1.0.rc2.206.gedb03e5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
