On 11/11/2014 12:57, Christian Gmeiner wrote:
> Today I got the final board and found out that a different
> connector is used as the one on my development board. The
> new connector has swaped pins for cd and wp.
>
> This change is tested on a production ready baord.
>
I fixed it myself.
> Signed-off-by: Christian Gmeiner <christian.gmei...@gmail.com>
> ---
> board/bachmann/ot1200/ot1200.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/board/bachmann/ot1200/ot1200.c b/board/bachmann/ot1200/ot1200.c
> index 2ed8cf7..007c1ef 100644
> --- a/board/bachmann/ot1200/ot1200.c
> +++ b/board/bachmann/ot1200/ot1200.c
> @@ -159,8 +159,8 @@ int board_mmc_getcd(struct mmc *mmc)
> gpio_direction_input(IMX_GPIO_NR(4, 5));
> ret = gpio_get_value(IMX_GPIO_NR(4, 5));
> } else {
> - gpio_direction_input(IMX_GPIO_NR(1, 4));
> - ret = !gpio_get_value(IMX_GPIO_NR(1, 4));
> + gpio_direction_input(IMX_GPIO_NR(1, 5));
> + ret = !gpio_get_value(IMX_GPIO_NR(1, 5));
> }
>
> return ret;
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
