Hello Andrew,
Am 13.11.2014 18:05, schrieb Andrew Ruder:
Before calling ubi_init() the U-Boot wrapper calls ubi_mtd_param_parse()
to have the UBI driver add it to its mtd_dev_param[] array and increment
mtd_devs. The first time ubi_init() is called, mtd_devs would be 1.
Before ubi_init() is called again (another partition is attached),
ubi_mtd_param_parse() is called again, incrementing mtd_devs again (now
2). This results in ubi_init() now trying to attach the first partition
and the second partition.
Fix this by adding a section at the end of ubi_exit() where we reset any
globals that would need to be reset (in this case, just mtd_devs).
Test case:
$ ubi part <mtdname> ; ubi part <mtdname>
Before patch:
$ ubi part data
UBI: attaching mtd1 to ubi0
UBI: scanning is finished
UBI: attached mtd1 (name "mtd=4", size 4 MiB) to ubi0
[...]
UBI: available PEBs: 0, total reserved PEBs: 32, [...]
$ ubi part data
UBI: detaching mtd1 from ubi0
UBI: mtd1 is detached from ubi0
UBI: attaching mtd1 to ubi0
[...]
UBI: available PEBs: 0, total reserved PEBs: 32, [...]
** Note that this is where it tries to attach mtd1 again, fails, and
** then detaches everything as it errors out of ubi_init()
UBI: detaching mtd1 from ubi0
UBI: mtd1 is detached from ubi0
UBI init error 17
$
After patch:
$ ubi part data
UBI: attaching mtd1 to ubi0
UBI: scanning is finished
UBI: attached mtd1 (name "mtd=4", size 4 MiB) to ubi0
[...]
UBI: available PEBs: 0, total reserved PEBs: 32, [...]
$ ubi part data
UBI: detaching mtd1 from ubi0
UBI: mtd1 is detached from ubi0
UBI: attaching mtd1 to ubi0
UBI: scanning is finished
UBI: attached mtd1 (name "mtd=4", size 4 MiB) to ubi0
[...]
UBI: available PEBs: 0, total reserved PEBs: 32, [...]
$
Signed-off-by: Andrew Ruder <andrew.ru...@elecsyscorp.com>
Cc: Heiko Schocher <h...@denx.de>
Cc: Kyungmin Park <kmp...@infradead.org>
---
drivers/mtd/ubi/build.c | 4 ++++
1 file changed, 4 insertions(+)
Not sure this is the best place to make the change, but it is one of the least
obtrusive, IMO. Please Cc: me on any responses as it will go directly to my
inbox!
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 584cf5f..fc5cbce 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -1384,6 +1384,10 @@ void ubi_exit(void)
misc_deregister(&ubi_ctrl_cdev);
class_remove_file(ubi_class, &ubi_version);
class_destroy(ubi_class);
+#ifdef __UBOOT__
+ /* Reset any globals that the driver depends on being zeroed */
+ mtd_devs = 0;
+#endif
}
module_exit(ubi_exit);
Good catch, but wondering, why this not poped up in my tests, as I
did such a test ... Hmm... trying currently on the tqm5200s
board on a cfi nor flash [1] shows no error for me. But I just
activated ubi errormessages and broke the board ... so I must wait
for a debugger :-(
Beside of this, your patch seems feasible, I test it soon.
bye,
Heiko
[1] log on the tqm5200s board:
=> mtdparts
device nor0 <fc000000.flash>, # parts = 7
#: name size offset mask_flags
0: firmware 0x00100000 0x00000000 0
1: dtb 0x00040000 0x00100000 0
2: kernel 0x00240000 0x00140000 0
3: small-fs 0x00280000 0x00380000 0
4: initrd 0x00200000 0x00600000 0
5: misc 0x00800000 0x00800000 0
6: big-fs 0x01000000 0x01000000 0
active partition: nor0,0 - (firmware) 0x00100000 @ 0x00000000
defaults:
mtdids : nor0=fc000000.flash
mtdparts:
mtdparts=fc000000.flash:1m(firmware),256k(dtb),2304k(kernel),2560k(small-fs),2m(initrd),8m(misc),16m(big-fs)
=> ubi part misc
UBI: default fastmap pool size: 8
UBI: default fastmap WL pool size: 25
UBI: attaching mtd1 to ubi0
UBI: scanning is finished
UBI: empty MTD device detected
UBI: attached mtd1 (name "mtd=5", size 8 MiB) to ubi0
UBI: PEB size: 262144 bytes (256 KiB), LEB size: 262016 bytes
UBI: min./max. I/O unit sizes: 1/1, sub-page size 1
UBI: VID header offset: 64 (aligned 64), data offset: 128
UBI: good PEBs: 32, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 0, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 0
UBI: available PEBs: 26, total reserved PEBs: 6, PEBs reserved for bad PEB
handling: 0
=> ubi info l
Volume information dump:
vol_id 2147479551
reserved_pebs 2
alignment 1
data_pad 0
vol_type 3
name_len 13
usable_leb_size 262016
used_ebs 2
used_bytes 524032
last_eb_bytes 2
corrupted 0
upd_marker 0
name layout volume
=> ubi info
UBI: MTD device name: "mtd=5"
UBI: MTD device size: 8 MiB
UBI: physical eraseblock size: 262144 bytes (256 KiB)
UBI: logical eraseblock size: 262016 bytes
UBI: number of good PEBs: 32
UBI: number of bad PEBs: 0
UBI: smallest flash I/O unit: 1
UBI: VID header offset: 64 (aligned 64)
UBI: data offset: 128
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 0
UBI: available PEBs: 26
UBI: total number of reserved PEBs: 6
UBI: number of PEBs reserved for bad PEB handling: 0
UBI: max/mean erase counter: 1/0
=> ubi create test 400000
Creating dynamic volume test of size 4194304
=> ubi info l
Volume information dump:
vol_id 0
reserved_pebs 17
alignment 1
data_pad 0
vol_type 3
name_len 4
usable_leb_size 262016
used_ebs 17
used_bytes 4454272
last_eb_bytes 262016
corrupted 0
upd_marker 0
name test
Volume information dump:
vol_id 2147479551
reserved_pebs 2
alignment 1
data_pad 0
vol_type 3
name_len 13
usable_leb_size 262016
used_ebs 2
used_bytes 524032
last_eb_bytes 2
corrupted 0
upd_marker 0
name layout volume
=> ubi part misc
UBI: detaching mtd1 from ubi0
UBI: mtd1 is detached from ubi0
UBI: default fastmap pool size: 8
UBI: default fastmap WL pool size: 25
UBI: attaching mtd1 to ubi0
UBI: scanning is finished
UBI: attached mtd1 (name "mtd=5", size 8 MiB) to ubi0
UBI: PEB size: 262144 bytes (256 KiB), LEB size: 262016 bytes
UBI: min./max. I/O unit sizes: 1/1, sub-page size 1
UBI: VID header offset: 64 (aligned 64), data offset: 128
UBI: good PEBs: 32, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
UBI: available PEBs: 9, total reserved PEBs: 23, PEBs reserved for bad PEB
handling: 0
=> ubi part misc
UBI: detaching mtd1 from ubi0
UBI: mtd1 is detached from ubi0
UBI: default fastmap pool size: 8
UBI: default fastmap WL pool size: 25
UBI: attaching mtd1 to ubi0
UBI: scanning is finished
UBI: attached mtd1 (name "mtd=5", size 8 MiB) to ubi0
UBI: PEB size: 262144 bytes (256 KiB), LEB size: 262016 bytes
UBI: min./max. I/O unit sizes: 1/1, sub-page size 1
UBI: VID header offset: 64 (aligned 64), data offset: 128
UBI: good PEBs: 32, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
UBI: available PEBs: 9, total reserved PEBs: 23, PEBs reserved for bad PEB
handling: 0
=> ubi part misc
UBI: detaching mtd1 from ubi0
UBI: mtd1 is detached from ubi0
UBI: default fastmap pool size: 8
UBI: default fastmap WL pool size: 25
UBI: attaching mtd1 to ubi0
UBI: scanning is finished
UBI: attached mtd1 (name "mtd=5", size 8 MiB) to ubi0
UBI: PEB size: 262144 bytes (256 KiB), LEB size: 262016 bytes
UBI: min./max. I/O unit sizes: 1/1, sub-page size 1
UBI: VID header offset: 64 (aligned 64), data offset: 128
UBI: good PEBs: 32, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
UBI: available PEBs: 9, total reserved PEBs: 23, PEBs reserved for bad PEB
handling: 0
=>
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
