Hello nitin.g...@freescale.com, On Fri, 14 Nov 2014 14:13:02 -0600, nitin.g...@freescale.com <nitin.g...@freescale.com> wrote: > From: Nitin Garg <nitin.g...@freescale.com> > > This patch set adds i.MX6 thermal sensor driver > and enables it for mx6sabre boards. Also adds > various anadig bit definitions as required for > upcoming drivers. > > Changes in v6: > -Aligned imx thermal driver macro defines with kernel > > Changes in v5: > -Don't modify the copyright of cpu.c and crm_regs.h file > > Changes in v4: > -Added imx6 thermal sensor as a driver > -Renamed the config define to be more meaningful > -Move the clock code to clock.c > -Reusing ocotp driver for reading fuse > -Fix check for calibration fuse not programmed > -Aligned the slope computation with kernel > -Added Anadig register defines as seperate commit > > Changes in v3: > -adds the mx6 thermal driver support > -adds the mx6 thermal support to mx6sabresd board. > > Changes in v2: > -run checkpatch and fix reported issues > > Nitin Garg (4): > mx6: clock: Add api to enable pll3 > mx6: thermal: Add i.MX6 CPU thermal sensor support > mx6: thermal: Check cpu temperature via thermal sensor > mx6: thermal: Enable thermal sensor for mx6 sabre boards.
So, is it 5 as the cover letter says, or 4 as the patches say? If actually 4 and only the cover letter is wrong, then there's no need to repost. If actually 5, then please repost them all, renumbered accordingly. Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot