This patch series are based on patch: http://patchwork.ozlabs.org/patch/409932/
Best Regards, Shaohui Xie > -----Original Message----- > From: shh....@gmail.com [mailto:shh....@gmail.com] > Sent: Thursday, November 13, 2014 11:26 AM > To: u-boot@lists.denx.de; Sun York-R58495 > Cc: Xie Shaohui-B21989 > Subject: [PATCH 1/5] powerpc/b4860qds: add xfi support > > From: Shaohui Xie <shaohui....@freescale.com> > > We need following changes to make xfi work on B4: > 1. set cross-point switch VSC3308 to use sfp config when running xfi; 2. add > 10G > interface check for xfi; 3. set phy address for xfi so the 10G ports can be > registered by mdio; > > Signed-off-by: Shaohui Xie <shaohui....@freescale.com> > --- > board/freescale/b4860qds/b4860qds.c | 40 > +++++++++++++++++++++++++++------ > board/freescale/b4860qds/eth_b4860qds.c | 6 +++++ > drivers/net/fm/b4860.c | 4 +++- > 3 files changed, 42 insertions(+), 8 deletions(-) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot