When enabling NAND support for a board, one must also define CONFIG_SYS_64BIT_VSPRINTF because this is needed in nand_util.c for correct output.
Signed-off-by: Wolfgang Denk <w...@denx.de> Cc: Stefan Roese <s...@denx.de> Cc: Reinhard Arlt <reinhard.a...@esd-electronics.com> --- Hello Mr. Arlt - with Stefan on vacation could you please be so kind and test this on your mecp5123 board? Thanks. -- wd include/configs/mecp5123.h | 2 ++ include/configs/mpc5121ads.h | 2 ++ 2 files changed, 4 insertions(+), 0 deletions(-) diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index 0831843..ed3e70f 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -187,6 +187,8 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /* * Configuration parameters for MPC5121 NAND driver */ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 45a004e..852d7b1 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -211,6 +211,8 @@ #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE #define CONFIG_SYS_NAND_SELECT_DEVICE /* driver supports mutipl. chips */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /* * Configuration parameters for MPC5121 NAND driver */ -- 1.6.0.6 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
