Hi Albert, On 13/11/2014 17:59, Albert ARIBAUD wrote: > Commit 3ff46cc4 fixed exception vectors setting in > the general ARM case, by either copying the exception > and indirect vector tables to normal (0x00000000) or > high (0xFFFF0000) vectors address, or setting VBAR to > U-Boot's base if applicable. > > i.MX27 SoC is ARM926E-JS, thus has only normal and > high options, but does not provide RAM at 0xFFFF0000 > and has only ROM at 0x00000000; it is therefore not > possible to move or change its exception vectors. > > Besides, i.MX27 ROM code does provide an indirect > vectors table but at a non-standard address and with > the reset and reserved vectors missing. > > Turn the current vector relocation code into a weak > routine called after relocate_code from crt0, and add > strong version for i.MX27. > > Series-Cc: Heiko Schocher <h...@denx.de> > > Signed-off-by: Albert ARIBAUD <albert.u.b...@aribaud.net> > ---
Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
