From: Minghuan Lian <minghuan.l...@freescale.com>
BRDCFG1_EMI1_SEL_MASK has been changed to 0x78, which contains
selection bits and connected status bit. So the Corresponding mux
value of RGMII is changed to BRDCFG1_EMI1_SEL_RGMII | BRDCFG1_EMI1_EN.
Signed-off-by: Minghuan Lian <minghuan.l...@freescale.com>
Signed-off-by: Shaohui Xie <shaohui....@freescale.com>
---
board/freescale/corenet_ds/eth_hydra.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/board/freescale/corenet_ds/eth_hydra.c
b/board/freescale/corenet_ds/eth_hydra.c
index 35825c4..9d8ca9e 100644
--- a/board/freescale/corenet_ds/eth_hydra.c
+++ b/board/freescale/corenet_ds/eth_hydra.c
@@ -250,11 +250,12 @@ void board_ft_fman_fixup_port(void *fdt, char *compat,
phys_addr_t addr,
return;
}
- if (mux == BRDCFG1_EMI1_SEL_RGMII) {
+ if (mux == (BRDCFG1_EMI1_SEL_RGMII | BRDCFG1_EMI1_EN)) {
/* RGMII */
/* The RGMII PHY is identified by the MAC connected to it */
sprintf(phy, "phy_rgmii_%u", port == FM1_DTSEC4 ? 0 : 1);
fdt_set_phy_handle(fdt, compat, addr, phy);
+ return;
}
/* If it's not RGMII or XGMII, it must be SGMII */
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
