On 08.12.2014 17:13, Fabio Estevam wrote:
I just tested it. And it doesn't help. I really think this code is not
reached in this failure case. As the SPL is not loaded completely.
Do you have this patch applied?
commit f2863ff3f47c99c4b5ba00be572e3a2c4213c5a2
Author: Nikita Kiryanov <nik...@compulab.co.il>
Date: Wed Oct 29 19:28:33 2014 +0200
arm: imx: make bmode command work with SPL/U-Boot combo
The bmode command forces the SoC to use a specific boot device
by writing its boot mode into SRC_GPR9, and notifying the SoC of
the change using SRC_GPR10[28] bit: if the bit is on, bootROM
uses the value in SRC_GPR9 instead of SRC_SMBR1 to determine
the boot device.
SPL on the other hand is oblivious to this distinction, so once
the bootROM loads SPL from the device configured in SRC_GPR10,
SPL will attempt to load U-Boot from the device configured in
SRC_SMBR1, which is not updated by the bootROM to the value in
SRC_GPR9.
The result is that the selected boot device is not used across all
the boot stages.
Update spl_boot_device() to look at gpr9 when necessary.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Stefano Babic <sba...@denx.de>
Cc: Troy Kisky <troy.ki...@boundarydevices.com>
Cc: Tim Harvey <thar...@gateworks.com>
Cc: Eric Nelson <eric.nel...@boundarydevices.com>
Cc: Fabio Estevam <fabio.este...@freescale.com>
Cc: Heiko Schocher <h...@denx.de>
Yes, its applied. I'm nearly on mainline right now. And it doesn't help.
Which makes sense if my current guess is correct, that the BootROM
doesn't load the SPL completely without this CCGR0 register setting in
the DCD.
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot