Move this option to Kconfig and update all boards. Signed-off-by: Simon Glass <s...@chromium.org> ---
Kconfig | 9 +++++++++ arch/arm/cpu/armv7/tegra-common/Kconfig | 3 +++ arch/arm/cpu/armv7/uniphier/Kconfig | 3 +++ arch/x86/Kconfig | 3 +++ include/configs/cm_fx6.h | 3 --- include/configs/exynos-common.h | 1 - include/configs/mx6sabre_common.h | 1 - include/configs/rpi.h | 1 - include/configs/s5p_goni.h | 1 - include/configs/sandbox.h | 1 - include/configs/smdkc100.h | 3 --- include/configs/snapper9260.h | 1 - include/configs/sunxi-common.h | 1 - include/configs/tegra-common.h | 1 - include/configs/ti_am335x_common.h | 1 - include/configs/ti_omap3_common.h | 1 - include/configs/uniphier-common.h | 2 -- include/configs/x86-common.h | 1 - 18 files changed, 18 insertions(+), 19 deletions(-) diff --git a/Kconfig b/Kconfig index d4ca152..9208d40 100644 --- a/Kconfig +++ b/Kconfig @@ -56,6 +56,15 @@ config CC_OPTIMIZE_FOR_SIZE This option is enabled by default for U-Boot. +config SYS_MALLOC_F_LEN + hex "Size of malloc() pool before relocation" + default 0x400 + help + Before relocation memory is very limited on many platforms. Still, + we can provide a small malloc() pool if needed. Driver model in + particular needs this to operate, so that it can allocate the + initial serial device and any others that are needed. + endmenu # General setup menuconfig EXPERT diff --git a/arch/arm/cpu/armv7/tegra-common/Kconfig b/arch/arm/cpu/armv7/tegra-common/Kconfig index 898e86d..9c98d19 100644 --- a/arch/arm/cpu/armv7/tegra-common/Kconfig +++ b/arch/arm/cpu/armv7/tegra-common/Kconfig @@ -17,6 +17,9 @@ config TEGRA124 endchoice +config SYS_MALLOC_F_LEN + default 0x1800 + config USE_PRIVATE_LIBGCC default y if SPL_BUILD diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig index 36b7f11..d68a262 100644 --- a/arch/arm/cpu/armv7/uniphier/Kconfig +++ b/arch/arm/cpu/armv7/uniphier/Kconfig @@ -23,6 +23,9 @@ config MACH_PH1_SLD8 endchoice +config SYS_MALLOC_F_LEN + default 0x2000 + config CMD_PINMON bool "Enable boot mode pins monitor command" depends on !SPL_BUILD diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index b523f25..969634f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -43,6 +43,9 @@ config DM_GPIO config DM_SERIAL default y +config SYS_MALLOC_F_LEN + default 0x800 + config RAMBASE hex default 0x100000 diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 0a4d93f..94ef7ab 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -21,10 +21,7 @@ #define CONFIG_MACH_TYPE 4273 #ifndef CONFIG_SPL_BUILD - #define CONFIG_CMD_GPIO - -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #endif /* Display information on boot */ diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h index 2c4f35a..59676ae 100644 --- a/include/configs/exynos-common.h +++ b/include/configs/exynos-common.h @@ -36,7 +36,6 @@ #define CONFIG_ENV_OVERWRITE /* Size of malloc() pool before and after relocation */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20)) /* select serial console configuration */ diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 379a25d..d174f97 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -25,7 +25,6 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_IMX6_THERMAL #define CONFIG_SYS_GENERIC_BOARD diff --git a/include/configs/rpi.h b/include/configs/rpi.h index ea19ad8..7ad8d08 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -46,7 +46,6 @@ CONFIG_SYS_SDRAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MALLOC_LEN SZ_4M -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_SYS_MEMTEST_START 0x00100000 #define CONFIG_SYS_MEMTEST_END 0x00200000 #define CONFIG_LOADADDR 0x00200000 diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 26167a4..8fadc68 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -40,7 +40,6 @@ #define CONFIG_CMDLINE_EDITING /* Size of malloc() pool before and after relocation */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20)) /* diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 3f4d588..977b1ab 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -63,7 +63,6 @@ /* * Size of malloc() pool, before and after relocation */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #define CONFIG_MALLOC_F_ADDR 0x0010000 #define CONFIG_SYS_MALLOC_LEN (32 << 20) /* 32MB */ diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index a7eb33e..080fc3a 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -48,9 +48,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) -/* Small malloc pool before relocation */ -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) - /* * select serial console configuration */ diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 504e456..4836ca3 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -21,7 +21,6 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) /* CPU */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 5e9223a..b92d853 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -29,7 +29,6 @@ #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM) # define CONFIG_DW_SERIAL -# define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #endif /* diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 08f0b2a..945ccd1 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -37,7 +37,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */ -#define CONFIG_SYS_MALLOC_F_LEN (4 << 10) #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_MALLOC_SIMPLE #endif diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 4ce9d49..20a55f4 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -21,7 +21,6 @@ #ifndef CONFIG_SPL_BUILD # define CONFIG_OMAP_SERIAL -# define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #endif #include <asm/arch/omap.h> diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 77211de..840e108 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -20,7 +20,6 @@ #ifndef CONFIG_SPL_BUILD # define CONFIG_OMAP_SERIAL -# define CONFIG_SYS_MALLOC_F_LEN (1 << 10) #endif /* The chip has SDRC controller */ diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier-common.h index 2140fcc..76ab4f6 100644 --- a/include/configs/uniphier-common.h +++ b/include/configs/uniphier-common.h @@ -43,8 +43,6 @@ are defined. Select only one of them." #define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE #define CONFIG_SMC911X_32_BIT -#define CONFIG_SYS_MALLOC_F_LEN 0x2000 - /*----------------------------------------------------------------------- * MMU and Cache Setting *----------------------------------------------------------------------*/ diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 30f0d57..48cf2fc 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -187,7 +187,6 @@ #define CONFIG_SYS_STACK_SIZE (32 * 1024) #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MALLOC_LEN 0x200000 -#define CONFIG_SYS_MALLOC_F_LEN (2 << 10) /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -- 2.2.0.rc0.207.ga3a616c _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot