Hello,
On 12/12/2014 04:52 PM, Przemyslaw Marczak wrote:
---------------------------------------------------------
mktest_files: script for generating random size long name files
---------------------------------------------------------
Usage:
./1_mktest_files.sh count
count - number of files to be generated
The output directory is: "./test_files"
---------------------------------------------------------
copy_files: copy the test_files/* into test partition mount point
---------------------------------------------------------
Usage:
./2_copy_files.sh mount_point
-----------------------------------------------------------
fat_test.sh: test fat read by write commands to the device console
----------------------------------------------------------
This script send commands to U-Boot console.
First specify few script variables, e.g:
- TTY="/dev/ttyS0"
- MMCDEV=0
- PARTITION=2
- LOAD_ADDR="0x40000000"
usage:
1. Target:
run: ums 0 mmc 0
2. Run script 1 and 2 to make and copy the test files
onto the test partition by UMS
3. This script:
- set test device $PARTITION and other variables in the script,
which is required for sending proper commands
- set $TTY in the script
run: ./3_fat_test.sh
4. Compare the crc results on the target and device consoles
(sorry for the mess on the console)
Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com>
---
1_mktest_files.sh | 82 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
2_copy_files.sh | 20 ++++++++++++++
3_fat_test.sh | 38 ++++++++++++++++++++++++++
3 files changed, 140 insertions(+)
create mode 100755 1_mktest_files.sh
create mode 100755 2_copy_files.sh
create mode 100755 3_fat_test.sh
This is just for some quick test.
I will add something more pretty to the sandbox.
Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marc...@samsung.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot