On 18 December 2014 at 12:48, Bin Meng <bmeng...@gmail.com> wrote: > Hi Jagan, > > On Thu, Dec 18, 2014 at 3:06 PM, Jagan Teki <jagannadh.t...@gmail.com> wrote: >> On 12 December 2014 at 18:35, Bin Meng <bmeng...@gmail.com> wrote: >>> The Crown Bay board has an SST25VF016B flash connected to the Tunnel >>> Creek processor SPI controller used as the BIOS media where U-Boot >>> is stored. Enable this flash support. >> >> Is this necessary to enable flash at BIOS media? > > Yes, so that we can use 'sf probe/erase/read/write' command from U-Boot shell. > >> How about other flash media's, is this specific to x86 cpu to store >> u-boot always in >> spi flash. > > Do you mean NOR/NAND? Modern x86 boards always have the SPI flash as > its BIOS media. Normally there is no NOR/NAND flash on x86 boards.
Ok. Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.t...@gmail.com> thanks! -- Jagan. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot