Hi Axel,
On 19.12.2014 05:40, Axel Lin wrote:
The depth could be from 2 to 256 from HW spec, so fix off-by-one for checking
fifo depth.
Signed-off-by: Axel Lin <axel....@ingics.com>
---
Hi,
I don't have this hardware handy, so please test it.
drivers/spi/designware_spi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c
index 98c9f03..14d0c23 100644
--- a/drivers/spi/designware_spi.c
+++ b/drivers/spi/designware_spi.c
@@ -164,7 +164,7 @@ static void spi_hw_init(struct dw_spi_priv *priv)
if (!priv->fifo_len) {
u32 fifo;
- for (fifo = 2; fifo <= 257; fifo++) {
+ for (fifo = 2; fifo <= 256; fifo++) {
dw_writew(priv, DW_SPI_TXFLTR, fifo);
if (fifo != dw_readw(priv, DW_SPI_TXFLTR))
break;
Please note that this code was not written by myself but is based on the
Linux kernel version. And from my current understanding, this code tries
to detect the FIFO size. So this 257 being bigger than the max value of
256 is most likely correct. Also another 257 is a few lines below your code:
dws->fifo_len = (fifo == 257) ? 0 : fifo;
So I don't think that we need to change this here.
BTW: It might be better to send this patch (or a question about this 256
vs 257) to the SPI Linux mailing list. The maintainer there will have
deeper knowledge about this issue.
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
