On 06/12/14 05:46, Sjoerd Simons wrote: > Since commit 4a271cb1b4ffdf330 (exynos: usb: Switch USB VBUS GPIOs to be > device tree configured) it's not needed for the board specific files to > turn on the VBUS GPIO by hand as that gets done based on device tree. So > drop the redundant code from the SMDK5420 board file. > > Signed-off-by: Sjoerd Simons <sjoerd.sim...@collabora.co.uk> > --- > board/samsung/smdk5420/smdk5420.c | 16 ---------------- > 1 file changed, 16 deletions(-) > > diff --git a/board/samsung/smdk5420/smdk5420.c > b/board/samsung/smdk5420/smdk5420.c > index a691222..06cba80 100644 > --- a/board/samsung/smdk5420/smdk5420.c > +++ b/board/samsung/smdk5420/smdk5420.c > @@ -21,24 +21,8 @@ > > DECLARE_GLOBAL_DATA_PTR; > > -#ifdef CONFIG_USB_EHCI_EXYNOS > -static int board_usb_vbus_init(void) > -{ > - /* Enable VBUS power switch */ > - gpio_direction_output(EXYNOS5420_GPIO_X26, 1); > - > - /* VBUS turn ON time */ > - mdelay(3); > - > - return 0; > -} > -#endif > - > int exynos_init(void) > { > -#ifdef CONFIG_USB_EHCI_EXYNOS > - board_usb_vbus_init(); > -#endif > return 0; > } > >
applied to u-boot-samsung. Thanks, Minkyu Kang. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot