The Juno Development Platform is a physical Versatile Express
device with some differences from the emulated semihosting
models. The main difference is that the system is split in
a SoC and an FPGA where the SoC hosts the serial ports at
totally different adresses.
Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
---
arch/arm/Kconfig | 4 ++++
board/armltd/vexpress64/Kconfig | 13 +++++++++++++
board/armltd/vexpress64/MAINTAINERS | 5 +++++
configs/vexpress_aemv8a_juno_defconfig | 5 +++++
include/configs/vexpress_aemv8a.h | 20 +++++++++++++++++++-
5 files changed, 46 insertions(+), 1 deletion(-)
create mode 100644 configs/vexpress_aemv8a_juno_defconfig
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9a7e36570de5..489c16f3ccd6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -736,6 +736,10 @@ config TARGET_VEXPRESS64_BASE_FVP
select ARM64
select SEMIHOSTING
+config TARGET_VEXPRESS64_JUNO
+ bool "Support Versatile Express Juno Development Platform"
+ select ARM64
+
config TARGET_LS2085A_EMU
bool "Support ls2085a_emu"
select ARM64
diff --git a/board/armltd/vexpress64/Kconfig b/board/armltd/vexpress64/Kconfig
index 2343e717f121..f7de039b7f5b 100644
--- a/board/armltd/vexpress64/Kconfig
+++ b/board/armltd/vexpress64/Kconfig
@@ -23,3 +23,16 @@ config SYS_CONFIG_NAME
default "vexpress_aemv8a"
endif
+
+if TARGET_VEXPRESS64_JUNO
+
+config SYS_BOARD
+ default "vexpress64"
+
+config SYS_VENDOR
+ default "armltd"
+
+config SYS_CONFIG_NAME
+ default "vexpress_aemv8a"
+
+endif
diff --git a/board/armltd/vexpress64/MAINTAINERS
b/board/armltd/vexpress64/MAINTAINERS
index 66c8dffa1634..0ba044d7ff87 100644
--- a/board/armltd/vexpress64/MAINTAINERS
+++ b/board/armltd/vexpress64/MAINTAINERS
@@ -9,3 +9,8 @@ VEXPRESS_AEMV8A_SEMI BOARD
M: Linus Walleij <linus.wall...@linaro.org>
S: Maintained
F: configs/vexpress_aemv8a_semi_defconfig
+
+JUNO DEVELOPMENT PLATFORM BOARD
+M: Linus Walleij <linus.wall...@linaro.org>
+S: Maintained
+F: configs/vexpress_aemv8a_juno_defconfig
diff --git a/configs/vexpress_aemv8a_juno_defconfig
b/configs/vexpress_aemv8a_juno_defconfig
new file mode 100644
index 000000000000..d28a4286e5af
--- /dev/null
+++ b/configs/vexpress_aemv8a_juno_defconfig
@@ -0,0 +1,5 @@
+# ARM Ltd. Juno Board Reference Design
+CONFIG_ARM=y
+CONFIG_TARGET_VEXPRESS64_JUNO=y
+CONFIG_DEFAULT_DEVICE_TREE="vexpress64"
+CONFIG_SHOW_BOOT_PROGRESS=y
diff --git a/include/configs/vexpress_aemv8a.h
b/include/configs/vexpress_aemv8a.h
index 85894bedf8bd..9527b02718dd 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -21,9 +21,11 @@
#define CONFIG_REMAKE_ELF
-#ifndef CONFIG_TARGET_VEXPRESS64_BASE_FVP
+#if !defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) && \
+ !defined(CONFIG_TARGET_VEXPRESS64_JUNO)
/* Base FVP and Juno not using GICv3 yet */
#define CONFIG_GICV3
+//#define CONFIG_GICV2
#endif
/*#define CONFIG_ARMV8_SWITCH_TO_EL1*/
@@ -44,6 +46,9 @@
/* ATF loads u-boot here for BASE_FVP model */
#define CONFIG_SYS_TEXT_BASE 0x88000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
+#elif CONFIG_TARGET_VEXPRESS64_JUNO
+#define CONFIG_SYS_TEXT_BASE 0xe0000000
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
#else
#define CONFIG_SYS_TEXT_BASE 0x80000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
@@ -88,10 +93,15 @@
#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define V2M_UART0 0x7ff80000
+#define V2M_UART1 0x7ff70000
+#else /* Not Juno */
#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
+#endif
#define V2M_WDT (V2M_PA_CS3 +
V2M_PERIPH_OFFSET(15))
@@ -122,6 +132,9 @@
#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
#define GICD_BASE (0x2f000000)
#define GICC_BASE (0x2c000000)
+#elif CONFIG_TARGET_VEXPRESS64_JUNO
+#define GICD_BASE (0x2C010000)
+#define GICC_BASE (0x2C02f000)
#else
#define GICD_BASE (0x2C001000)
#define GICC_BASE (0x2C002000)
@@ -140,7 +153,11 @@
/* PL011 Serial Configuration */
#define CONFIG_PL011_SERIAL
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define CONFIG_PL011_CLOCK 7273800
+#else
#define CONFIG_PL011_CLOCK 24000000
+#endif
#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
(void *)CONFIG_SYS_SERIAL1}
#define CONFIG_CONS_INDEX 0
@@ -161,6 +178,7 @@
#define CONFIG_CMD_ENV
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_IMI
+#define CONFIG_CMD_LOADB
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
--
1.9.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
