Hi,
Thanks, I've queued both patch up in u-boot-sunxi/next. Note I've
changed the sync:0 to sync:3 in the LCD_MODE for the Primo73,
because of:
https://github.com/jwrdegoede/u-boot-sunxi/commit/5a6b9376f78128d00459db21da80f17ad3473d3a
Before the above commit the lcd-code was ignoring the sync field,
but now it honors it, and to get the lcd-code to behave the same as
android you need sync:3
I've updated:
http://linux-sunxi.org/LCD
To reflect this.
Regards,
Hans
On 27-12-14 08:38, Siarhei Siamashka wrote:
This patch uses the same ZQ and DRAM clock settings as in the
pre-installed Android firmware.
Signed-off-by: Siarhei Siamashka <siarhei.siamas...@gmail.com>
---
board/sunxi/Kconfig | 13 +++++++++++++
board/sunxi/MAINTAINERS | 5 +++++
configs/MSI_Primo81_defconfig | 12 ++++++++++++
3 files changed, 30 insertions(+)
create mode 100644 configs/MSI_Primo81_defconfig
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 7140b80..f9b3786 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -149,6 +149,19 @@ config TARGET_MINI_X
bool "MINI_X"
depends on MACH_SUN4I
+config TARGET_MSI_PRIMO81
+ bool "MSI Primo81 (7.85\" tablet)"
+ depends on MACH_SUN6I
+ ---help---
+ The MSI Primo81 is an A31s based tablet, with 1G RAM, 16G NAND,
+ 1024x768 IPS LCD display, mono speaker, 0.3 MP front camera, 2.0 MP
+ rear camera, 3500 mAh battery, gt911 touchscreen, mma8452 accelerometer
+ and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons
+ (both volume buttons are also connected to the UBOOT_SEL pin). The
+ external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB
+ OTG and 3.5mm headphone jack. More details are available at
+ http://linux-sunxi.org/MSI_Primo81
+
config TARGET_BA10_TV_BOX
bool "BA10_TV_BOX"
depends on MACH_SUN4I
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 3db42ea..c6460f0 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -66,3 +66,8 @@ IPPO-Q8H-V5 BOARD
M: Chen-Yu Tsai <w...@csie.org>
S: Maintained
F: configs/Ippo_q8h_v5_defconfig
+
+MSI-PRIMO81 BOARD
+M: Siarhei Siamashka <siarhei.siamas...@gmail.com>
+S: Maintained
+F: configs/MSI_Primo81_defconfig
diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig
new file mode 100644
index 0000000..b4b0f6d
--- /dev/null
+++ b/configs/MSI_Primo81_defconfig
@@ -0,0 +1,12 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS=""
+CONFIG_FDTFILE="sun6i-a31s-primo81.dtb"
+CONFIG_USB_KEYBOARD=n
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN6I=y
++S:CONFIG_TARGET_MSI_PRIMO81=y
++S:CONFIG_DRAM_CLK=360
++S:CONFIG_DRAM_ZQ=122
+# Wifi power
++S:CONFIG_AXP221_DLDO1_VOLT=3300
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
