Hi Simon Thanks for your reply
I have added u-boot ELF as the coreboot payload u-boot: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), statically linked, not stripped. Got this link but its a year old. http://lists.denx.de/pipermail/u-boot/2013-July/159140.html Thanks Ajoy On Mon, Dec 29, 2014 at 7:36 PM, Simon Glass <s...@chromium.org> wrote: > Hi, > > On 28 December 2014 at 21:38, Ajoy Das <dasajo...@gmail.com> wrote: > > Hi > > > > Need Help > > > > I want to run U-BOOT as coreboot payload on QEMU platform > > > > I am on uboot-x86 git > > > > Compiled U-BOOT with make coreboot-x86_defconfig and make all > > > > Running qemu with > > qemu-system-i386 -bios ../coreboot/build/coreboot.rom -hda disk.img > > -nographic -m 1g > > > > But The system crashes with the following message > > > > qemu: fatal: Trying to execute code outside RAM or ROM at 0x5e2a36c2 > > > > Loading Segment: addr: 0x0000000001110000 memsz: 0x00000000000588e8 > filesz: > > 0x00000000000252eb > > lb: [0x0000000000100000, 0x000000000012b030) > > Post relocation: addr: 0x0000000001110000 memsz: 0x00000000000588e8 > filesz: > > 0x00000000000252eb > > using LZMA > > [ 0x01110000, 011688e8, 0x011688e8) <- fffd2770 > > dest 01110000, end 011688e8, bouncebuffer 3ff77000 > > Loaded segments > > Jumping to boot code at 01110015 > > CPU0: stack: 00126000 - 00127000, lowest used address 00126b8c, stack > used: > > 1140 bytes > > entry = 0x01110015 > > lb_start = 0x00100000 > > lb_size = 0x0002b030 > > buffer = 0x3ff77000 > > qemu: fatal: Trying to execute code outside RAM or ROM at 0x5e2a36c2 > > > > EAX=0000000a EBX=000186a0 ECX=01145d15 EDX=19203eb0 > > ESI=00000000 EDI=00000000 EBP=01145f6c ESP=01145f54 > > EIP=5e2a36c2 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 > > ES =0018 00000000 ffffffff 00cf9300 DPL=0 DS [-WA] > > CS =0010 00000000 ffffffff 00cf9b00 DPL=0 CS32 [-RA] > > SS =0018 00000000 ffffffff 00cf9300 DPL=0 DS [-WA] > > DS =0018 00000000 ffffffff 00cf9300 DPL=0 DS [-WA] > > FS =0020 19203f5c ffffffff 00cf9300 DPL=0 DS [-WA] > > GS =0018 00000000 ffffffff 00cf9300 DPL=0 DS [-WA] > > LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT > > TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy > > GDT= 19203e60 00000047 > > IDT= 00000000 00000000 > > CR0=60000033 CR2=00000000 CR3=00000000 CR4=00000000 > > DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000 > > DR6=ffff0ff0 DR7=00000400 > > CCS=00000218 CCD=01145f50 CCO=ADDL > > EFER=0000000000000000 > > FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001f80 > > FPR0=0000000000000000 0000 FPR1=0000000000000000 0000 > > FPR2=0000000000000000 0000 FPR3=0000000000000000 0000 > > FPR4=0000000000000000 0000 FPR5=0000000000000000 0000 > > FPR6=0000000000000000 0000 FPR7=0000000000000000 0000 > > XMM00=00000000000000000000000000000000 > > XMM01=00000000000000000000000000000000 > > XMM02=00000000000000000000000000000000 > > XMM03=00000000000000000000000000000000 > > XMM04=00000000000000000000000000000000 > > XMM05=00000000000000000000000000000000 > > XMM06=00000000000000000000000000000000 > > XMM07=00000000000000000000000000000000 > > Aborted (core dumped) > > > > qemu-system-i386 --version > > QEMU emulator version 1.0 (qemu-kvm-1.0), Copyright (c) 2003-2008 Fabrice > > Bellard > > > > Is QEMU not supported for coreboot and u-boot > > I'm not sure it's been tried but there's no reason why it should work. > It seems to be crashing in U-Boot before there is any serial output. > Did you put u-boot-dtb.bin as the payload? > > Regards, > Simon >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot