This patch set is to support qspi for mx6sxsabresd board. To mx6sxsabresd Revb board, 32M flash is used, but in header file, CONFIG_SPI_FLASH_BAR is not defined, and we still use SZ_16M. The LUT initialization qspi_set_lut function uses 32BIT addr, however CONFIG_SPI_FLASH_BAR and 24BIT addr should be used to access bigger than 16MB size flash, and BRRD/BRWR should also be supported. Future patches will fix this.
Since flash opcodes are not recommended to use in driver level, use QSPI_CMD_xx to replace OPCODE_xx. It is qspi controller's feature to program LUT with QSPI_CMD_xx which same value with OPCODE_xx. Since Revb board's qspi flash support 4K erase, 4K erase is added in driver. Peng Fan (5): QuadSPI: use QSPI_CMD_xx instead of flash opcodes QuadSPI: use correct amba_base arm:mx6sx add QSPI support imx:qspi add 4K erase support imx:mx6sxsabresd add qspi support arch/arm/cpu/armv7/mx6/clock.c | 50 ++++++++++ arch/arm/include/asm/arch-mx6/clock.h | 1 + arch/arm/include/asm/arch-mx6/imx-regs.h | 12 +-- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 40 ++++++++ drivers/spi/fsl_qspi.c | 137 +++++++++++++++++++--------- include/configs/mx6sxsabresd.h | 12 +++ 6 files changed, 205 insertions(+), 47 deletions(-) -- 1.8.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot