Prafulla, (...deleted some stuff...) > > > What patches are in the pipeline? > > Some other board supports (MV88F6281GTW_GE) and Kirkwood SPI driver support > Kirkwood USB support (at this moment) > Also very interesting :)
(...deleted, too...) > > > > What I forgot to mention is the i2c driver inside u-boot. > > I need this to read the mac address from an additional eeprom. > > This makes mass production more ease and doesn't produce > > hight costs :) > > Kirkwood has in-built i2c(TWSI) controller, well.. the plans are in place > enable driver for it, but this is not blocking issue right now hence > pending ;-) > > Just FYI: you can protect some flash sector and use it in place of eeprom, > this will lower the board cost and complexity too. > > But if you are planning to use some different GPIOs for i2c and bit-banged > driver on the top of it, then you will need gpio control, so you can do it > by using simple readl/writel calls meanwhile driver to come in :-) > Yes, I thought about that, too. GPIO support will also be helpful for doing this! Do you have some snippets how to readl/writel by hand? > The best way I will suggest you is: > Put pre-programmed eeprom around Kirkwood TWSI interface and enable "TWSI > serial ROM initialization" you don't need anything else for this. (I hope > you are having enough kirkwood documentation) Ref: table 32: > http://www.marvell.com/files/products/embedded_processors/kirkwood/HW_88F62 >81_OpenSource.pdf > Good idea - I will read about that. I've got access to all documents - including an marvell web account for internal documents. Regards, Dieter > Regards.. > Prafulla . . > > > Dieter > > > > > > > I'm willing to contribute some code if someone guides me a bit? > > > > > > > > You are most welcomed.... > > > > Pls feel free to raise your queries... > > > > > > Here they are :) > > > Thanks, > > > Dieter > > > > > > > Regards.. > > > > Prafulla . . > > > > > > > > > Thanks in advance, > > > > > Dieter > > > > > > > > > > _______________________________________________ > > > > > U-Boot mailing list > > > > > U-Boot@lists.denx.de > > > > > http://lists.denx.de/mailman/listinfo/u-boot > > > > > > _______________________________________________ > > > U-Boot mailing list > > > U-Boot@lists.denx.de > > > http://lists.denx.de/mailman/listinfo/u-boot > > > > _______________________________________________ > > U-Boot mailing list > > U-Boot@lists.denx.de > > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot