Dear Johan, In message <de9b121e0906160012q5975b23cnd320908aee6cd...@mail.gmail.com> you wrote: > Seems like that was the trick. After removing the breakout board it > works much better. > > I still got some problems which I don't know if its software related. > Sometimes when I power on the board the ethernet LEDs does not turn > green and the network does not work. If I power cycle the board a > number of times the LEDs turn green I can can use the network. Do you > know if that might be hw related or may it be something with the > initialization?
This is most likely a hardware problem. Please contach Logic for information about the required changes on the board. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "May the forces of evil become confused on the way to your house." - George Carlin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot