Hello Minkyu,
On 01/08/2015 03:11 PM, Minkyu Kang wrote:
On 08/01/15 20:33, Przemyslaw Marczak wrote:
Most i2c peripherals for this board doesn't
support new i2c api. So CONFIG_DM_I2C on this
board can be enabled for test only. The i2c command
works fine with it.
This is the first step before adding
support to the new power framework soon.
Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com>
Cc: Lukasz Majewski <l.majew...@samsung.com>
Cc: Jaehoon Chung <jh80.ch...@samsung.com>
Cc: Simon Glass <s...@chromium.org>
Cc: Minkyu Kang <mk7.k...@samsung.com>
---
include/configs/trats2.h | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/include/configs/trats2.h b/include/configs/trats2.h
index 42481ab..8b099dd 100644
--- a/include/configs/trats2.h
+++ b/include/configs/trats2.h
@@ -159,15 +159,18 @@
#define CONFIG_RANDOM_UUID
/* I2C */
-#include <asm/arch/gpio.h>
-
+#if 0 /* For test */
+#define CONFIG_DM_I2C
+#endif
please remove test code.
#define CONFIG_CMD_I2C
-
-#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_S3C24X0
#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000
#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0
+
+#ifndef CONFIG_DM_I2C
+#define CONFIG_SYS_I2C
#define CONFIG_MAX_I2C_NUM 8
+
#define CONFIG_SYS_I2C_SOFT
#define CONFIG_SYS_I2C_SOFT_SPEED 50000
#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00
@@ -177,6 +180,8 @@
#define CONFIG_SOFT_I2C_READ_REPEATED_START
#define CONFIG_SYS_I2C_INIT_BOARD
+#include <asm/arch/gpio.h>
+
#ifndef __ASSEMBLY__
int get_soft_i2c_scl_pin(void);
int get_soft_i2c_sda_pin(void);
@@ -192,6 +197,7 @@ int get_soft_i2c_sda_pin(void);
#define CONFIG_POWER_MUIC_MAX77693
#define CONFIG_POWER_FG_MAX77693
#define CONFIG_POWER_BATTERY_TRATS2
+#endif /* ifndef CONFIG_DM_I2C */
/* Security subsystem - enable hw_rand() */
#define CONFIG_EXYNOS_ACE_SHA
@@ -203,11 +209,13 @@ int get_soft_i2c_sda_pin(void);
#define CONFIG_MISC_INIT_R
/* Download menu - Samsung common */
+#ifndef CONFIG_DM_I2C
#define CONFIG_LCD_MENU
#define CONFIG_LCD_MENU_BOARD
/* Download menu - definitions for check keys */
#ifndef __ASSEMBLY__
+#include <power/pmic.h>
#include <power/max77686_pmic.h>
#define KEY_PWR_PMIC_NAME "MAX77686_PMIC"
@@ -219,6 +227,7 @@ int get_soft_i2c_sda_pin(void);
#define KEY_VOL_UP_GPIO EXYNOS4X12_GPIO_X22
#define KEY_VOL_DOWN_GPIO EXYNOS4X12_GPIO_X33
#endif /* __ASSEMBLY__ */
+#endif
/* LCD console */
#define LCD_BPP LCD_COLOR16
Thanks,
Minkyu Kang
Ok, I will remove it in the both cases.
Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marc...@samsung.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
