Hello 

We have a PPC MPC5125 device with 64MB NOR flash. The U-boot has to load the 
kernel and initramfs from a UBIFS partition.
Recently we made an upgrade from U-Boot version V2010.12 to version V2014.10. 
Now after some regression tests with power cuts, we got an UBIFS state, which 
is unreadable for U-Boot  version  V2014.10. If I do a tftpboot an mount the 
UBIFS with linux, there is no problem. It is also very strange, that if I 
downgrade the U-Boot to V2010.12, then it is also no problem with the partition 
and everything is readable. I tend to say there is probably a regression with 
the most recent U-Boot version. But I don't know where I can start to find it. 
I enabled also the DEBUG define, but there appears no additional debug message 
concerning UBIFS. How can I debug this?

Here the output from U-Boot V2014.10:

=> ubi part fs
UBI: attaching mtd1 to ubi0
UBI: scanning is finished
UBI: attached mtd1 (name "mtd=0", size 63 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 130944 bytes
UBI: min./max. I/O unit sizes: 1/64, sub-page size 1
UBI: VID header offset: 64 (aligned 64), data offset: 128
UBI: good PEBs: 504, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 280/161, WL threshold: 4096, image sequence 
number: 2041090957
UBI: available PEBs: 0, total reserved PEBs: 504, PEBs reserved for bad PEB 
handling: 0
=> ubifsmount ubi:flash
=> ubifsls
            53549  Mon Dec 01 11:34:08 2014  setup.xml
             2051  Wed Nov 19 09:05:49 2014  LOG_Default_000001.csv
        filldir: Error in ubifs_iget(), ino=44049 ret=ffffffea!

Regards
Anton

********************************************************************************************************************************
This email message, including any attachments, is for the sole use of the 
intended recipient(s) and may contain 
confidential and privileged information. Any unauthorized review, use, 
disclosure or distribution is prohibited. 
If you are not the intended recipient, please contact the sender by reply 
e-mail and destroy all copies of the original message. 
[Delta Energy Systems]
********************************************************************************************************************************

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to