Hi Stefan, On 26 January 2015 at 02:35, Stefan Roese <s...@denx.de> wrote: > On 26.01.2015 10:23, Stefan Roese wrote: >>> >>> diff --git a/board/amcc/canyonlands/Kconfig >>> b/board/amcc/canyonlands/Kconfig >>> index 0fc6877..cbc5ff9 100644 >>> --- a/board/amcc/canyonlands/Kconfig >>> +++ b/board/amcc/canyonlands/Kconfig >>> @@ -29,4 +29,13 @@ config ARCHES >>> >>> endchoice >>> >>> +config DM >>> + default y >>> + >>> +config DM_SERIAL >>> + default y >>> + >>> +config SYS_MALLOC_F_LEN >>> + default 0x400 >>> + >> >> >> Hmmm. This does not seem to work. With your patch series applied on >> current top-of-tree I get this error (for glacier_ramboot or >> canyonlands): >> >> $ make -s -j10 >> board/amcc/canyonlands/Kconfig:38:warning: config symbol defined without >> type >> drivers/serial/serial-uclass.c:29:2: error: #error "Serial is required >> before relocation - define CONFIG_SYS_MALLOC_F_LEN to make this work" >> make[1]: *** [drivers/serial/serial-uclass.o] Error 1 >> >> Somehow the CONFIG_SYS_MALLOC_F_LEN define is not available in the >> .config used. Do you have any idea why it might be missing? > > > Okay. Found it. Its the missing type here. I'll send some follow-up patches > once I have all tested on canyonlands here.
OK good. Also see u-boot-dm branch ppc-working if you need more context. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot