Reduce the lcd_display_bitmap #ifdef complexity by extracting Atmel specific
code for setting cmap for bitmap images into a new function lcd_set_cmap().
A default version is implemented with the remainder of the code.

Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Bo Shen <voice.s...@atmel.com>
Cc: Simon Glass <s...@chromium.org>
Cc: Anatolij Gustschin <ag...@denx.de>
---
 common/lcd.c                | 46 ++++++++++++++++++++++-----------------------
 drivers/video/atmel_lcdfb.c | 11 +++++++++++
 2 files changed, 33 insertions(+), 24 deletions(-)

diff --git a/common/lcd.c b/common/lcd.c
index dcee3c0..8a8d6c3 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -613,9 +613,27 @@ __weak void fb_put_word(uchar **fb, uchar **from)
 }
 #endif /* CONFIG_BMP_16BPP */
 
+__weak void lcd_set_cmap(bmp_image_t *bmp, unsigned colors)
+{
+       int i;
+       bmp_color_table_entry_t cte;
+       ushort *cmap = configuration_get_cmap();
+
+       for (i = 0; i < colors; ++i) {
+               cte = bmp->color_table[i];
+               *cmap = (((cte.red)   << 8) & 0xf800) |
+                       (((cte.green) << 3) & 0x07e0) |
+                       (((cte.blue)  >> 3) & 0x001f);
+#if defined(CONFIG_MPC823)
+               cmap--;
+#else
+               cmap++;
+#endif
+       }
+}
+
 int lcd_display_bitmap(ulong bmp_image, int x, int y)
 {
-       ushort *cmap = NULL;
        ushort *cmap_base = NULL;
        ushort i, j;
        uchar *fb;
@@ -663,29 +681,8 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
        debug("Display-bmp: %d x %d  with %d colors\n",
                (int)width, (int)height, (int)colors);
 
-       if (bmp_bpix == 8) {
-               cmap = configuration_get_cmap();
-               cmap_base = cmap;
-
-               /* Set color map */
-               for (i = 0; i < colors; ++i) {
-                       bmp_color_table_entry_t cte = bmp->color_table[i];
-#if !defined(CONFIG_ATMEL_LCD)
-                       ushort colreg =
-                               ( ((cte.red)   << 8) & 0xf800) |
-                               ( ((cte.green) << 3) & 0x07e0) |
-                               ( ((cte.blue)  >> 3) & 0x001f) ;
-                       *cmap = colreg;
-#if defined(CONFIG_MPC823)
-                       cmap--;
-#else
-                       cmap++;
-#endif
-#else /* CONFIG_ATMEL_LCD */
-                       lcd_setcolreg(i, cte.red, cte.green, cte.blue);
-#endif
-               }
-       }
+       if (bmp_bpix == 8)
+               lcd_set_cmap(bmp, colors);
 
        padded_width = (width & 0x3 ? (width & ~0x3) + 4 : width);
 
@@ -706,6 +703,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
        switch (bmp_bpix) {
        case 1: /* pass through */
        case 8: {
+               cmap_base = configuration_get_cmap();
 #ifdef CONFIG_LCD_BMP_RLE8
                u32 compression = get_unaligned_le32(&bmp->header.compression);
                if (compression == BMP_BI_RLE8) {
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 2a71eba..5add136 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -11,6 +11,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/clk.h>
 #include <lcd.h>
+#include <bmp_layout.h>
 #include <atmel_lcdc.h>
 
 /* configurable parameters */
@@ -80,6 +81,16 @@ void lcd_setcolreg(ushort regno, ushort red, ushort green, 
ushort blue)
 #endif
 }
 
+void lcd_set_cmap(bmp_image_t *bmp, unsigned colors)
+{
+       int i;
+
+       for (i = 0; i < colors; ++i) {
+               bmp_color_table_entry_t cte = bmp->color_table[i];
+               lcd_setcolreg(i, cte.red, cte.green, cte.blue);
+       }
+}
+
 void lcd_ctrl_init(void *lcdbase)
 {
        unsigned long value;
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to