Hi Reza, On 29 January 2015 at 20:40, Reza Nikoopour <rnikoop...@gmail.com> wrote: > Hey Simon, > > It seems like Crochet doesn't actually build U-boot with specifying which > config to use. > > I'm looking up how to build uboot using rpi_b.h
OK. Please don't top post. The config is now called 'rpi'. Are you using the latest U-Boot? Regards, Simon > > Reza > > On Jan 29, 2015 5:24 PM, "Simon Glass" <s...@chromium.org> wrote: >> >> Hi Reza, >> >> On 29 January 2015 at 14:03, Reza Nikoopour <rnikoop...@gmail.com> wrote: >> > Hey guys, >> > >> > I'm working on setting up an NTP server using the following: >> > >> > Raspberry Pi Model B+ >> >> >> > Raspberry PI GPS Add-on < >> >> http://imall.iteadstudio.com/raspberry-pi-gps-add-on.html > >> >> FreeBSD 10.1 (built with Crochet) < >> >> https://github.com/kientzle/crochet-freebsd > >> >> >> > u-boot-pi < https://github.com/gonzoua/u-boot-pi > >> >> >> > >> > I've run into a problem with u-boot. If I boot the Pi without anything >> > plugged into the GPIO port it boots all the way into FreeBSD. However, >> > when I try to boot with the GPS Add-on plugged into the GPIO, it does >> > not >> > boot past u-boot. >> > >> > When the GPS Add-on is plugged while booting the autoboot prompt shows >> > saying "Press any key to abort autoboot" (or something to that effect) >> > then the letter 'L' appears on the screen and starts moving from right >> > to >> > left erasing text it comes across then moving up to the next line. When >> > it >> > reaches the top line the 'L' moves from the right side of the screen to >> > the >> > left and then wraps back around to the right indefinitely. >> >> I think I had strange console things like this when U-Boot crashed. It >> may be that there is a bug which is causing it to go into the weeds. >> it could be that tstc() or getc() is causing this since it happens >> while waiting for you to press a key.. >> >> I'm sorry that is not very helpful... >> >> > >> > My rpi_b.h config file can be found at < >> > https://gist.github.com/rnikoopour/c4cfc271b4856816ee99 >. >> > >> > I thought this was an issue of the GPS Add-on input being read by the >> > serial console as valid input. I tried disabling the serial console by >> > removing the UART console lines and adding < #define >> > CONFIG_8xx_CONS_NONE >> >>. I also tried disabling the GPIO port by commenting out the GPIO >> >> section >> > as well. >> > >> > Would anyone know why this is happening or how I can fix this? >> > >> Regards, >> Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot