This patch adds workaround for the ARM errata 799270 which says
"If the L2 cache logic clock is stopped because of L2 inactivity,
setting or clearing the ACTLR.SMP bit might not be effective. The bit is
modified in the ACTLR, meaning a read of the register returns the
updated value. However the logic that uses that bit retains the previous
value."
Signed-off-by: Kimoon Kim <kimoon....@samsung.com>
Signed-off-by: Akshay Saraswat <aksha...@samsung.com>
Reviewed-by: Simon Glass <s...@chromium.org>
Tested-by: Simon Glass <s...@chromium.org>
---
Changes since v1:
- Added Reviewed-by & Tested-by.
arch/arm/cpu/armv7/exynos/lowlevel_init.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/cpu/armv7/exynos/lowlevel_init.c
b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
index 3ad5b78..3ebbf84 100644
--- a/arch/arm/cpu/armv7/exynos/lowlevel_init.c
+++ b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
@@ -46,6 +46,28 @@ enum {
#ifdef CONFIG_EXYNOS5420
/*
+ * Ensure that the L2 logic has been used within the previous 256 cycles
+ * before modifying the ACTLR.SMP bit. This is required during boot before
+ * MMU has been enabled, or during a specified reset or power down sequence.
+ */
+void enable_smp(void)
+{
+ uint32_t temp, val;
+
+ /* Enable SMP mode */
+ mrc_auxr(temp);
+ temp |= (1 << 6);
+
+ /* Dummy read to assure L2 access */
+ val = readl(EXYNOS5420_INFORM_BASE);
+ val &= 0;
+ temp |= val;
+ mcr_auxr(temp);
+ dsb();
+ isb();
+}
+
+/*
* Set L2ACTLR[7] to reissue any memory transaction in the L2 that has been
* stalled for 1024 cycles to verify that its hazard condition still exists.
*/
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
