On Mon, 2015-02-16 at 23:25 +0100, Hans de Goede wrote: > Add support for the 6" 480x800 tl059wv5c0 panel used on e.g. Utoo P66 and > Aigo M60/M608/M606 tablets. > > Signed-off-by: Hans de Goede <hdego...@redhat.com>
All 4 patches: Acked-by: Ian Campbell <i...@hellion.org.uk> I a couple of small comments on this one, which you can either ignore or fixup as you commit: > --- > board/sunxi/Kconfig | 8 ++++++++ > drivers/video/sunxi_display.c | 7 +++++++ > 2 files changed, 15 insertions(+) > > diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig > index ef59e21..19e7286 100644 > --- a/board/sunxi/Kconfig > +++ b/board/sunxi/Kconfig > @@ -411,6 +411,14 @@ config VIDEO_LCD_PANEL_HITACHI_TX18D42VM > ---help--- > 7.85" 1024x768 Hitachi tx18d42vm LCD panel support > > +config VIDEO_LCD_TL059WV5C0 > + bool "tl059wv5c0 LCD panel" > + select VIDEO_LCD_PANEL_I2C > + select VIDEO_LCD_IF_PARALLEL > + ---help--- > + Say Y here to add support for the 6" 480x800 tl059wv5c0 panel used > + on e.g. Utoo P66 and Aigo M60/M608/M606 tablets. "Say Y" doesn't really make sense within a choice option. Better to follow the lead of the Hitachi panel above and '6" 480x800 tl059wv5c0 panel'. I'm not sure a non-exhaustive list of boards/tablets is useful either -- presumably if we know to list them here we also know to enable the option in the defconfig. > @@ -1030,6 +1031,12 @@ static void sunxi_mode_set(const struct ctfb_res_modes > *mode, > mdelay(50); /* Wait for lcd controller power on */ > hitachi_tx18d42vm_init(); > } > + if (IS_ENABLED(CONFIG_VIDEO_LCD_TL059WV5C0)) { > + unsigned int orig_i2c_bus = i2c_get_bus_num(); > + i2c_set_bus_num(CONFIG_VIDEO_LCD_I2C_BUS); I see that you save and restore the value but it might be nice for the relevant axp drivers to also call this using CONFIG_SYS_SPD_BUS_NUM? (I'm assuming it is set initially to this via i2c_init_all()?) Ian. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot