On Saturday, February 28, 2015 at 05:33:31 AM, Stephen Warren wrote: > On 02/19/2015 07:29 AM, Marek Vasut wrote: > > On Monday, February 16, 2015 at 07:28:45 PM, Stephen Warren wrote: > >> Following on from my Google+ post about DWC2/RPi USB host controller > >> issues in U-Boot. > > ... > > >> On an RPi with the DWC2 controller connected directly to a single > >> external USB connector (i.e model A, A+), a LS (and perhaps FS) device > >> pluged directly into the board doesn't work due to the small max packet > >> size limit. > >> > >> Your patch 9b1161af8c51 "usb: dwc2: Add support for multi-packet control > >> xfers" in u-boot-usb.git topic/dwc2 addresses this issue for control > >> transfers at least. With your patch, I can now enumerate a USB kbd on a > >> model A+. That's a great improvement; thanks for the quick response with > >> a patch. > >> > >> However, when I enable CONFIG_USB_KEYBOARD, I see errors when the USB > >> > >> keyboard input driver initializes: > >>> starting USB... > >>> USB0: Core Release: 2.80a > >>> scanning bus 0 for devices... 3 USB Device(s) found > >>> > >>> scanning usb for storage devices... 0 Storage Device(s) found > >>> scanning usb for ethernet devices... 0 Ethernet Device(s) found > >>> > >>> dev = 0df92ac0 pipe = 0x40408380 buf = 0db4a780 size = 8 int = 10 > >>> Failed to get keyboard state from device 413c:2010 > >> > >> I haven't investigated this further yet. > > > > Wow, this error is new, I have not seen this one on SoCFPGA. > > This error is because the keyboard driver uses interrupt transfers, and > these aren't implemented in DWC2.
Uh, the debugging spit in submit_int_msg() should certainly be converted into something more human readable. > I worked around this by forcing the > keyboard driver to use control transfers, and fixing what I think is a > bug in this case; see patch below. With this, USB keyboard works on an > RPI A+ Cool, good job. > although it hangs pretty quickly. I assume one of the busy loops > in dwc2.c without a time out isn't completing. Oh, dang. Those should certainly be fixed. Looking at the patch, could it be that CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP support in usb_kbd.c is broken altogether ? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot