Adds the registers to get the serial number of dra7xx boards.
Serial# environment variable will be set if not done already.
This will be useful to show correct information in
"fastboot devices" commands.
Signed-off-by: Angela Stegmaier <angelaba...@ti.com>
Signed-off-by: Dileep Katta <dileep.ka...@linaro.org>
---
arch/arm/cpu/armv7/omap5/prcm-regs.c | 2 ++
arch/arm/include/asm/omap_common.h | 2 ++
board/ti/dra7xx/evm.c | 11 +++++++++++
3 files changed, 15 insertions(+)
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c
b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index 0745d42..020a964 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -440,6 +440,8 @@ struct omap_sys_ctrl_regs const dra7xx_ctrl = {
.control_emif1_sdram_config_ext = 0x4AE0C144,
.control_emif2_sdram_config_ext = 0x4AE0C148,
.control_wkup_ldovbb_mpu_voltage_ctrl = 0x4AE0C158,
+ .control_std_fuse_die_id_3 = 0x4AE0C210,
+ .control_std_fuse_prod_id_0 = 0x4AE0C214,
.control_padconf_mode = 0x4AE0C5A0,
.control_xtal_oscillator = 0x4AE0C5A4,
.control_i2c_2 = 0x4AE0C5A8,
diff --git a/arch/arm/include/asm/omap_common.h
b/arch/arm/include/asm/omap_common.h
index 323952f..b329803 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -362,6 +362,8 @@ struct omap_sys_ctrl_regs {
u32 control_core_control_io1;
u32 control_core_control_io2;
u32 control_id_code;
+ u32 control_std_fuse_die_id_3;
+ u32 control_std_fuse_prod_id_0;
u32 control_std_fuse_opp_bgap;
u32 control_ldosram_iva_voltage_ctrl;
u32 control_ldosram_mpu_voltage_ctrl;
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 6522241..e20d950 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -88,10 +88,21 @@ int board_init(void)
int board_late_init(void)
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ char serialno[72];
+ uint32_t serialno_lo, serialno_hi;
+
if (omap_revision() == DRA722_ES1_0)
setenv("board_name", "dra72x");
else
setenv("board_name", "dra7xx");
+
+ if (!getenv("serial#")) {
+ printf("serial# not set, setting...\n");
+ serialno_lo = readl((*ctrl)->control_std_fuse_die_id_3);
+ serialno_hi = readl((*ctrl)->control_std_fuse_prod_id_0);
+ sprintf(serialno, "%08x%08x", serialno_hi, serialno_lo);
+ setenv("serial#", serialno);
+ }
#endif
return 0;
}
--
1.8.3.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
