On 01/29/2015 10:52 PM, ying.zh...@freescale.com wrote: > From: Ying Zhang <b40...@freescale.com> > > Modify CONFIG_USB_MAX_CONTROLLER_COUNT value to 1 on P1022DS. > As ETSEC2 and USB2 are muxed; thus if ETSEC2 is enabled, the > system bus hangs on USB2 if ETSEC2 is enabled but "usb start" > command is issued. Hence making default controller count to 1 > to avoid system hang. > > Signed-off-by: Nikhil Badola <nikhil.bad...@freescale.com> > Reviewed-by: Yusong Sun <york...@freescale.com> > ---
Applied to u-boot-mpc85xx master, awaiting for upstream. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
